Postfault Operation of Five-Phase Induction Machine With Minimum Total Losses Under Single Open-Phase Fault
Open Access
- 9 November 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 208696-208706
Abstract
Five-phase induction machines (FPIM) have attracted notable interest in safety critical applications as well as wind energy generation systems. This is largely due to their additional degrees of freedom that retain the machine starting/running steadily under fault conditions. In the available literature, postfault operation of multiphase machines is typically implemented using two techniques: minimum losses (ML) or maximum torque per ampere (MT) strategies. The optimization embedded into the control strategy, however, mostly addresses minimization of the stator copper loss, while the effect of the rotor loss and core loss are discarded in the optimal current calculation. This paper revisits postfault operation of the FPIMunder single open phase fault (1OPF) by including the effect of both rotor loss and core loss on the machine’s optimal current calculation over the full achievable loading range. The proposed searching algorithm, which combines the advantages of both MT and ML techniques, attempts to minimize the total machine losses induced by the current components of both the fundamental αβ and the secondary xy subspaces. The theoretical findings have been experimentally validated using a 1.5Hp five-phase prototype system.Keywords
This publication has 34 references indexed in Scilit:
- A General Analytical Three-Phase Induction Machine Core Loss Model in the Arbitrary Reference FrameIEEE Transactions on Industry Applications, 2017
- Sensorless field oriented control of five phase induction motor with third harmonic injection2017
- Control Strategy for Multiphase Drives With Minimum Losses in the Full Torque Operation Range Under Single Open-Phase FaultIEEE Transactions on Power Electronics, 2016
- Model predictive current controller using Kalman filter for fault-tolerant five-phase wind energy conversion systems2016
- Steady-State Equivalent Circuit of Five-Phase Induction Machines with Different Stator Connections under Open Line ConditionsIEEE Transactions on Industrial Electronics, 2016
- Maximum torque per ampere control strategy of a 5-phase PM generator in healthy and faulty modes for tidal marine turbine application2014
- Multiphase Wind Energy generation with direct matrix converter2014
- Parameter Identification of Five-Phase Induction Machines With Single Layer WindingsIEEE Transactions on Industrial Electronics, 2014
- Control of Multiphase Induction Motors With an Odd Number of Phases Under Open-Circuit Phase FaultsIEEE Transactions on Power Electronics, 2012
- Disturbance-free operation of a multiphase current-regulated motor drive with an opened phaseIEEE Transactions on Industry Applications, 1994