Preparation and Characterization of Rigid Polyimide-Clay-Polydimethylsiloxane Hybrid
- 7 May 2010
- journal article
- research article
- Published by SAGE Publications in High Performance Polymers
- Vol. 22 (6) , 742-760
Abstract
A series of polyimide (PI)-clay-polydimethylsiloxane (PDMS) hybrid films were successfully prepared by using two different reactions, a sol—gel reaction of diethoxydimethylsilane and imidization of polyamide acid (PAA) prepared from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA), in the presence of 2 wt% of organically modified montmorillonite. X-ray diffraction of the hybrid films indicated that the clay layers were exfoliated and dispersed into PI. Scanning electron microscopy was used to confirm the dispersion of PDMS and to measure the particle size of the PDMS. Thermogravimetric analysis, differential scanning calorimetry, viscoelastic analysis and stress— strain tests were used to evaluate the performance of the hybrid films. The addition of small amount of PDMS was found to overcome the brittle problem of PI-clay nanocomposites, and the PI-clay-PDMS hybrid showed excellent thermal and physical properties.Keywords
This publication has 28 references indexed in Scilit:
- Controlled silylation of montmorillonite and its polyethylene nanocompositesPolymer, 2006
- Clay-Based Polymer Nanocomposites: Research and Commercial DevelopmentJournal of Nanoscience and Nanotechnology, 2005
- Preparation and properties of (BATB–ODPA) polyimide–clay nanocomposite materialsJournal of Applied Polymer Science, 2004
- Adhesion and permeability of polyimide–clay nanocomposite films for protective coatingsJournal of Applied Polymer Science, 2003
- Polyamide 6-clay nanocomposites/polypropylene-grafted-maleic anhydride alloysPolymer, 2001
- Polybenzoxazine–montmorillonite hybrid nanocomposites: synthesis and characterizationPolymer, 2000
- Sorption of water in nylon 6‐clay hybridJournal of Applied Polymer Science, 1993
- Synthesis of nylon 6-clay hybridJournal of Materials Research, 1993
- Crystallization of a nylon-6-clay hybrid by injection moulding under elevated pressureJournal of Materials Science Letters, 1993
- Polyimides1984