Influence of Electrode Design and Contacting Layers on Performance of Electrolyte Supported SOFC/SOEC Single Cells
Open Access
Abstract
The solid oxide cell is a basis for highly efficient and reversible electrochemical energy conversion. A single cell based on a planar electrolyte substrate as support (ESC) is often utilized for SOFC/SOEC stack manufacturing and fulfills necessary requirements for application in small, medium and large scale fuel cell and electrolysis systems. Thickness of the electrolyte substrate, and its ionic conductivity limits the power density of the ESC. To improve the performance of this cell type in SOFC/SOEC mode, alternative fuel electrodes, on the basis of Ni/CGO as well as electrolytes with reduced thickness, have been applied. Furthermore, different interlayers on the air side have been tested to avoid the electrode delamination and to reduce the cell degradation in electrolysis mode. Finally, the influence of the contacting layer on cell performance, especially for cells with an ultrathin electrolyte and thin electrode layers, has been investigated. It has been found that Ni/CGO outperform traditional Ni/8YSZ electrodes and the introduction of a ScSZ interlayer substantially reduces the degradation rate of ESC in electrolysis mode. Furthermore, it was demonstrated that, for thin electrodes, the application of contacting layers with good conductivity and adhesion to current collectors improves performance significantly.Keywords
Funding Information
- SMWK/SAB (100095962)
- NOW / BMWi (03BI106)
- FFG Austria (838770)
This publication has 17 references indexed in Scilit:
- Comparison of the performances of single cell solid oxide fuel cell stacks with Ni/8YSZ and Ni/10CGO anodes with H2S containing fuelJournal of Power Sources, 2012
- Mechanism of oxygen electrode delamination in solid oxide electrolyzer cellsInternational Journal of Hydrogen Energy, 2010
- Solid Oxide Electrolysis Cells: Degradation at High Current DensitiesJournal of the Electrochemical Society, 2010
- NexTech materials demonstrates world's largest SOFC platformInternational Journal of Hydrogen Energy, 2009
- Post-test evaluation of oxygen electrodes from solid oxide electrolysis stacks☆International Journal of Hydrogen Energy, 2009
- Solid Oxide Electrolysis Cells: Microstructure and Degradation of the Ni/Yttria-Stabilized Zirconia ElectrodeJournal of the Electrochemical Society, 2008
- Hole and Electron Conductivities of 20 mol %-REO[sub 1.5] Doped CeO[sub 2] (RE = Yb, Y, Gd, Sm, Nd, La)Journal of the Electrochemical Society, 2004
- Total electrical conductivity and defect structure of ZrO2–CeO2–Y2O3–Gd2O3 solid solutionsSolid State Ionics, 2000
- Electrical and Ionic Conductivity of Gd-Doped CeriaJournal of the Electrochemical Society, 2000
- The chemical reaction between ceria and fully stabilised zirconiaSolid State Ionics, 1999