Design and stiffness modeling of a four-degree-of-freedom nanopositioning stage based on six-branched-chain compliant parallel mechanisms
Authors:
- 1 June 2020
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 91 (6) , 065002
Abstract
Multi-degree-of-freedom (multi-DOF) nanopositioning stages (NPSs) have rapidly growing applications in the spatial micro-/nano-machining and manipulation. Compliant parallel mechanisms (CPMs) demonstrate advantages to achieve a large output stiffness and high payload. A four-DOF NPS based on six-branched-chain CPMs is proposed in this paper. First, a mechanism design approach is introduced. One primary vertical DOF is generated using three parallel-kinematic lever amplifiers. A three-revolute-revolute-revolute mechanism acts as the kinematic configuration to produce three secondary planar DOFs. Three types of single-axis and one type of double-axis notch flexure hinges (NFHs) are employed to realize the nanoscale displacement/movement guiding, transferring, and decoupling. Second, a stiffness modeling approach is derived. Combined with exact compliance matrices of 54 NFHs and 95 flexible beams, a four-DOF high-efficiency stiffness model of the six-branched-chain CPM is built. The calculation procedure of the whole input/output stiffnesses and coupling ratios takes 12.06 ms. Simulation and prototype test results validate the calculation accuracy. For example, the maximum calculation deviation of input stiffnesses is verified to be 4.52% and 8.18%, respectively. The two proposed approaches contribute to the statics parameter optimization of spatial multi-DOF NPSs.Keywords
Funding Information
- National Natural Science Foundation of China (51905106)
This publication has 28 references indexed in Scilit:
- A planar 3-DOF nanopositioning platform with large magnificationPrecision Engineering, 2016
- Development of a piezoelectrically actuated two-degree-of-freedom fast tool servo with decoupled motions for micro-/nanomachiningPrecision Engineering, 2014
- Design and analysis of a novel flexure-based 3-DOF mechanismMechanism and Machine Theory, 2014
- Design and Kinematics Modeling of a Novel 3-DOF Monolithic Manipulator Featuring Improved Scott-Russell MechanismsJournal of Mechanical Design, 2013
- Kinetostatic modeling of 3-RRR compliant micro-motion stages with flexure hingesMechanism and Machine Theory, 2009
- Review of circular flexure hinge design equations and derivation of empirical formulationsPrecision Engineering, 2008
- Development of a Three Axis controlled Fast Tool Servo for Ultra Precision Machining (1st Report)Journal of the Japan Society for Precision Engineering, 2007
- Modeling of flexure-hinge type lever mechanismsPrecision Engineering, 2003
- Flexural-hinge guided motion nanopositioner stage for precision machining: finite element simulationsPrecision Engineering, 2001
- Performance optimization of a fast tool servo for single-point diamond turning machinesIEEE/ASME Transactions on Mechatronics, 1999