Reusing Flowback and Produced Water with Different Salinity to Prepare Guar Fracturing Fluid
Open Access
Abstract
Economical and environmental concerns have forced the oil and gas industry to consider reusing flowback and produced water for fracturing operations. The major challenge is that the high-salinity of flowback water usually prevents its compatibility with several fracturing fluid additives. In this paper, the authors explored an economic and effective method to prepare guar fracturing fluids with different salinity waters. The main research idea was to use chelating agents to mask metal ions, such as calcium and magnesium, that are harmful to crosslinking. Firstly, a complexometric titration test was conducted to measure the chelating ability of three chelating agents. Secondly, through viscosity, crosslinking, and hanging tests, it was verified that the complex masking method could cope with the problem of high-valence metal ions affecting crosslinking. Thirdly, the preferred chelating agent was mixed with several other additives, including thickeners, crosslinkers, and pH regulators, to prepare the novel guar fracturing fluid. The comprehensive performances of the novel fluid system were tested such as temperature and shear resistance, friction reduction, gel-breaking performance, and core damage rate. The results show that the organophosphate chelating agent (i.e., CA-5) had the greatest ability to chelate calcium and magnesium ions. There was a good linear relationship between the dosage of CA-5 and the total molar concentration of calcium and magnesium ions in brine water. The main mechanism was that the chelating agent formed a complex with calcium and magnesium ions at a chelation ratio of 1:5. The test results of the comprehensive performance evaluation indicate that the prepared guar fracturing fluid met the requirements for field application, and the lower the salinity of the flowback water, the more it is economical and effective.Keywords
Funding Information
- National Natural Science Foundation of China (52004306, 52174045)
- the Strategic Cooperation Technology Projects of CNPC and CUPB (ZLZX2020-01, ZLZX2020-02)
- National Science and Technology Major Projects of China (2016ZX05030005, 2016ZX05051003)
This publication has 23 references indexed in Scilit:
- Quantitative prediction of oil and gas prospects of the Sinian-Lower Paleozoic in the Sichuan Basin in central ChinaEnergy, 2019
- Evaluation of permeability damage caused by drilling and fracturing fluids in tight low permeability sandstone reservoirsJournal of Petroleum Science and Engineering, 2019
- Development of Chelating Agent-Based Polymeric Gel System for Hydraulic FracturingEnergies, 2018
- A method to recover natural gas hydrates with geothermal energy conveyed by CO2Energy, 2018
- A Critical Review of Hydraulic-Fracturing Fluids for Moderate- to Ultralow-Permeability Formations Over the Last DecadeSPE Production & Operations, 2014
- Water Management Challenges Associated with the Production of Shale Gas by Hydraulic FracturingElements, 2011
- Sorption of Water Vapor, Hydration, and Viscosity of Carboxymethylhydroxypropyl Guar, Diutan, and Xanthan Gums, and Their Molecular Association with and without Salts (NaCl, CaCl2, HCOOK, CH3COONa, (NH4)2SO4 and MgSO4) in Aqueous SolutionLangmuir, 2009
- Characterization and Intermolecular Interactions of Hydroxypropyl Guar SolutionsBiomacromolecules, 2002
- The Effect of Solvent and Ions on the Structure and Rheological Properties of Guar SolutionsThe Journal of Physical Chemistry A, 2001
- Fracturing Fluids - Then and NowJournal of Petroleum Technology, 1996