Tribological properties of oleic acid-modified zinc oxide nanoparticles as the lubricant additive in poly-alpha olefin and diisooctyl sebacate base oils
Authors:
- 15 July 2016
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (74) , 69836-69844
Abstract
Oleic acid (OA) modified ZnO nanoparticles with an average size of 4.04 nm were prepared via a facile in situ one-step route. The as-prepared ZnO nanoparticles were characterized by X-ray diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy. The light-absorbing performance and thermal stability of the as-prepared ZnO nanoparticles were evaluated by ultraviolet-visible light spectrophotometry and thermogravimetric analysis, and their tribological behaviour as the lubricant additive in poly-alpha olefin (PAO) and diisooctyl sebacate (DIOS) base oils was evaluated with a four-ball machine. The surface morphology of the wear scar was observed with a scanning electron microscope and a three-dimensional optical profiler, and the element composition of the wear scar was determined by energy dispersive spectrometry. It was found that the surface-capping of ZnO nanoparticles by OA helps to greatly increase their dispersibility and thermal stability. In the meantime, OA-modified ZnO nanoparticles can effectively improve the antiwear and friction-reducing abilities as well as the load-carrying capacity of the base oils, which is due to the formation of a tribofilm in association with the tribo-sintering and/or adsorption of the additives on the rubbed steel surfaces. Furthermore, the friction-reducing and antiwear performances of the as-prepared ZnO nanoparticles as lubricating oil additives seem to be closely related to the polarity of the base oils. Namely, the OA-modified ZnO additive exhibits better tribological behaviour in apolar PAO than in polar DIOS.Keywords
This publication has 42 references indexed in Scilit:
- Preparation of triazine derivatives and evaluation of their tribological properties as lubricant additives in poly-alpha olefinTribology International, 2013
- Preparation of Nickel-Based Nanolubricants via a Facile In Situ One-Step Route and Investigation of Their Tribological PropertiesTribology Letters, 2013
- Ultrasound assisted shape regulation of CuO nanorods in ionic liquids and their use as energy efficient lubricant additivesJournal of Materials Chemistry A, 2013
- Preparation and tribological properties of surface modified Cu nanoparticlesTransactions of Nonferrous Metals Society of China, 2012
- Enhanced tribology properties of ZnO/Al2O3 composite nanoparticles as liquid lubricating additivesJournal of Sol-Gel Science and Technology, 2011
- Synthesis and Tribological Properties of Stearic Acid-Modified Anatase (TiO2) NanoparticlesTribology Letters, 2010
- Friction reduction properties of a CuO nanolubricant used as lubricant for a NiCrBSi coatingWear, 2010
- CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricantsWear, 2008
- Experimental analysis of tribological properties of lubricating oils with nanoparticle additivesWear, 2007
- Film-thickness effect of Ag lubricant layer in the nano-regionWear, 2004