Dynamic mechanical analysis of alkali-treated flax/hemp yarn on SS304 wire mesh reinforced epoxy hybrid composites
Authors:
Open Access
- 1 October 2026
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Mechanical Engineering
- Vol. 12, 1973220
Abstract
Natural fiber reinforced hybrid composites are emerging because of the burgeoning need for lightweight, sustainable and high-performance materials for use in automotive and engineering applications. But traditional natural fibre composites have some drawbacks like insufficient stiffness, weak adhesion between the fibers and poor thermal stability in dynamic conditions. The present study aimed at the development of hybrid epoxy composites reinforced with flax fibers and SS304 wire mesh to improve dynamic mechanical properties of the developed composite. Two laminate constructions were made by hand lay-up technique, namely, F1 [Flax/SS304/Flax] and F2 [Flax/(Flax–Hemp Yarn on SS304 Mesh)/Flax]. The two hand lay-up laminate constructions were made as F1 (Flax/SS304/Flax) and F2 (Flax/(Flax–Hemp Yarn on SS304 Mesh)/Flax). Before fabrication, flax fibers and SS304 wire mesh were treated with 5% NaOH to enhance the fiber–matrix interfacial bonding. Dynamic Mechanical Analysis (DMA) was carried out in dual-cantilever configuration, ranging from 25 °C to 150 °C at frequencies of 1, 2.5 and 5 Hz. Viscoelastic properties of the developed laminates have been investigated through the storage modulus, loss modulus, damping factor (tan δ), complex modulus and glass transition temperature. It was observed from the results that the woven hybrid laminate (F2) had a higher value of storage modulus, loss modulus, and complex modulus than the non-woven laminate (F1) in all cases, which means that it is stiffer, more energy dissipative, and more thermo-mechanically stable. Moreover, F2 showed a lower tan δ and slightly higher glass transition temperatures, suggesting better interfacial adhesion and reduced molecular mobility in the epoxy matrix. The combined effect of woven composite flax-hemp yarns and SS304 wire mesh enhanced the dynamic mechanical properties of the composite, which has a great potential for lightweight application in automotive industry, vibration damping and semi-structural construction.Keywords
This publication has 37 references indexed in Scilit:
- Optimization of the Dependability of a Hammer Mill Under Budgetary Constraints Using Evolutionary Algorithms, Stochastic Methods, and Statistical Performance AssessmentQuality and Reliability Engineering International, 2026
- Weaving Architecture‐Driven Changes in Mechanical, Vibration and Acoustic Behaviour of Metal Mesh Embedded Natural Fiber Hybrid CompositePolymers for Advanced Technologies, 2026
- Meta-modeling of maintenance assets using an evolutionary algorithm approach: the case of a corn shellerComputers & Industrial Engineering, 2025
- Proposal of a new efficient method for pareto front capture in multiobjective mechanical design: the case of a computer numerical control milling machineOperational Research, 2025
- Multi-Objective Optimization of Cutting Parameters in Hard Turning Using the NSGA-II AlgorithmOperations Research Forum, 2024
- Parameters estimation of the Weibull law for reliability modeling of an equipmentLife Cycle Reliability and Safety Engineering, 2024
- A probabilistic model for evaluating the operational safety and operational safety analysis by the maximum likelihood method: application on the cameroonian company of petroleum depot of garouaLife Cycle Reliability and Safety Engineering, 2024
- Effect of Resin on Mechanical and Wear Performance of Wire Mesh-Reinforced Hydrophilic Fiber CompositeTransactions of the Indian Institute of Metals, 2021
- Dynamic Mechanical Behavior of Hybrid Flax/Basalt Fiber Polymer Composites2021
- Effect of Barium Sulfate on Mechanical, DMA, Wear Analysis of Woven Hybrid with Wire Mesh Composite2021