High-Vacuum Tribological Behaviors of Wear-Resistant WC/a-C:H Coatings with Strong Adhesion on Zirconia
Open Access
- 30 September 2025
- Vol. 18 (19) , 4560
Abstract
To improve the applicability of tetragonal zirconia (TZP) in the high-vacuum friction drive field, a strategy combining Cr ion implantation-modified layer and hydrogen-containing amorphous carbon coating was proposed in this study. The designed coating (WC/a-C:H) consists of a Cr bonding layer, a WC-rich load-bearing layer and an a-C:H target layer. The effects of implantation voltage on the adhesion strength of WC/a-C:H coatings were investigated. The tribological behaviors of WC/a-C:H against TZP and TZP self-mated pairs at various loads in high vacuum were comparatively explored. The results indicated that when the TZP substrate was modified by a Cr ion implantation layer, the WC/a-C:H coating showed obviously better adhesion strength. Therein, at the implantation voltage of 30 kV, the coating exhibited the optimal adhesion of 88 N, which was 112% higher than that of the coating on original TZP. Surprisingly, the WC/a-C:H coating featuring maximum adhesion strength also achieved a high friction coefficient (>0.22) and exceptional wear resistance across a wide load range of 0.5~15 N in high vacuum. Compared with the TZP self-mated wear pairs, the wear rates of both the WC/a-C:H coating and its counterparts decreased by 1~2 orders of magnitude. Unlike the severe abrasive wear and plastic deformation of the TZP self-mated pairs, even at 15 N, the WC/a-C:H coating exhibited mild abrasive wear and adhesive wear mechanisms.Keywords
Funding Information
- National Natural Science Foundation of China (52305213, 52205214)
- China Postdoctoral Science Foundation (2022M712527)
- Natural Science Foundation of Shaanxi Province of China (2023-JC-QN-0537)
- Fundamental Research Funds for the Central Universities (xzy012023066)
- Shaanxi Postdoctoral Research Project
This publication has 45 references indexed in Scilit:
- Hydrogen‐Enhanced Catalytic Conversion of Amorphous Carbon to Graphene for Achieving SuperlubricitySmall, 2023
- Mechanical properties and wear behaviors of Cu-doped zirconia-toughened alumina ceramicsCeramics International, 2023
- Theoretical superlubricity and its friction stability of amorphous carbon film induced by simple surface graphitizationApplied Surface Science, 2023
- Deconvolution process approach in Raman spectra of DLC coating to determine the sp3 hybridization content using the ID/IG ratio in relation to the quantification determined by X-ray photoelectron spectroscopyDiamond and Related Materials, 2022
- In-situ thermal stability analysis of amorphous Si-doped carbon filmsCarbon, 2021
- Effect of grain size and amount of zirconia on the physical and mechanical properties and the wear resistance of zirconia-toughened aluminaCeramics International, 2020
- The effect of vacuum annealing on microstructure, adhesion strength and electrochemical behaviors of multilayered AlCrTiSiN coatingsApplied Surface Science, 2019
- Processing of alumina–zirconia composites by surface modification route with enhanced hardness and wear resistanceCeramics International, 2015
- Martensitic transformation in zirconia containing ceramics and its applicationsCurrent Opinion in Solid State and Materials Science, 2005
- Zirconia-toughened alumina (ZTA) ceramicsJournal of Materials Science, 1989