PVD Coatings for Lightweight Bipolar Plates
Open Access
Abstract
Bipolar plates are one of the main components of proton exchange membrane fuel cells (PEMFCs). Their functions include distributing reactants, supporting the cell, and conducting heat and electricity. They account for a significant proportion of the fuel cell stack’s weight and volume. The main materials currently used for bipolar plates are graphite and stainless steel. Aluminium has a much lower density than steel and is easier to form than both steel and graphite. Its use, therefore, would allow fuel cells with higher power densities but is hindered due to it being prone to corrosion. This work focused on the development of corrosion-resistant and conductive coatings to address this issue. Carbon coatings with Ti and Cr adhesion layers were deposited on aluminium substrates using closed-field unbalanced magnetron sputtering. These coatings were tested for corrosion properties and performance on the cathode side of a single-cell fuel cell. Coated aluminium samples were also tested for their ability to maintain their corrosion protection after being formed. Coating with a Cr adhesion layer outperformed that with a Ti adhesion layer in both forming and fuel cell tests, demonstrating much lower performance degradation after accelerated stress testing.Keywords
Funding Information
- Innovate UK (80677)
This publication has 28 references indexed in Scilit:
- Protective coatings for metal bipolar plates of fuel cells: A reviewInternational Journal of Hydrogen Energy, 2022
- Investigation of the effect of carbon post- vs pre-coated metallic bipolar plates for PEMFCs – start-up and shut-downInternational Journal of Hydrogen Energy, 2022
- Carbon-based coatings for metallic bipolar plates used in proton exchange membrane fuel cellsInternational Journal of Hydrogen Energy, 2019
- Studies on the physical and electrochemical properties of Ni-P coating on commercial aluminum as bipolar plate in PEMFCFuel, 2019
- Mechanisms of growth, properties and degradation of amorphous carbon films by closed field unbalanced magnetron sputtering on stainless steel bipolar plates for PEMFCsApplied Surface Science, 2017
- Characteristics of amorphous carbon films to resist high potential impact in PEMFCs bipolar plates for automotive applicationInternational Journal of Hydrogen Energy, 2017
- Durability and characterization studies of chromium carbide coated aluminum fuel cell stackInternational Journal of Hydrogen Energy, 2016
- Investigation of single-layer and multilayer coatings for aluminum bipolar plate in polymer electrolyte membrane fuel cellInternational Journal of Hydrogen Energy, 2014
- Ni–P and Ni–Co–P coated aluminum alloy 5251 substrates as metallic bipolar plates for PEM fuel cell applicationsInternational Journal of Hydrogen Energy, 2012
- Conductive amorphous carbon-coated 316L stainless steel as bipolar plates in polymer electrolyte membrane fuel cellsInternational Journal of Hydrogen Energy, 2009