Fatigue strength degradation of metals in corrosive environments
Open Access
- 12 December 2017
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 276 (1) , 012039
Abstract
Structures exposed to aggressive environmental conditions are often subjected to time-dependent loss of coating and loss of material due to corrosion; this causes reduction in the cross-sectional properties of the members, increased surface roughness, surface irregularities and corrosion pits, and degradation of material strengths. These effects have been identified and simulated in different research studies. However, time and corrosive media dependent fatigue strength curves for materials have not been discussed in the design or assessment guidelines for structures. This paper attempts to review the corrosion degradation process and available approaches/models used to determine the fatigue strength of corroded materials and to interpolate corrosion deterioration data. High cycle fatigue and full range fatigue life formulae for fatigue strength of corroded materials are proposed. The above formulae depend on the endurance limit of corroded material, in addition to the stress-life fatigue curve parameters of the uncorroded material. The endurance limit of corroded material can either be determined by a limited number of tests in the very high-cycle fatigue region or predicted by an analytical approach. Comparison with experimentally measured corrosion fatigue behavior of several materials is provided and discussed.Keywords
This publication has 18 references indexed in Scilit:
- Spectral fatigue damage assessment of tanker deck structural detail subjected to time-dependent corrosionInternational Journal of Fatigue, 2013
- Effect of corrosion on the high cycle fatigue strength of martensitic stainless steel X12CrNiMoV12-3International Journal of Fatigue, 2013
- Ultimate strength reliability analysis of corroded steel-box girder bridgesThin-Walled Structures, 2011
- Hydrogen embrittlement and corrosion fatigue of corroded bridge wiresJournal of Constructional Steel Research, 2009
- Fatigue criteria for integrity assessment of long-span steel bridge with health monitoringTheoretical and Applied Fracture Mechanics, 2006
- Analysis of the stress intensity factor around corrosion pits developed on structures subjected to mixed loadingScripta Materialia, 2006
- Ultimate shear strength of plate elements with pit corrosion wastageThin-Walled Structures, 2004
- Corrosion and biaxial fatigue of welded structuresJournal of Materials Processing Technology, 2003
- Maintenance of steel bridges on Honshu-Shikoku crossingJournal of Constructional Steel Research, 2002
- A new function for fatigue curves characterization and its multiple meritsInternational Journal of Fatigue, 2001