Codes coupling optimization for absolute measurement
Authors:
- 27 November 2023
- conference paper
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12769, 38-185
Abstract
Absolute measurement has always been one of the important development directions of precision measurement, there are problems that the diffraction and mask working parameters are not considered in the positioning pulse analysis of the absolute code mask at present. Therefore, in order to solve the coupling optimal performance problem of absolute positioning code in actual work, an absolute code should be designed for working in the best parameter-model. In this paper, a multi-parameter model of absolute code working status is established, and the influence of working parameters on its positioning performance is analyzed respectively. The analysis shows that the distance and the angle between the mask and the grating, and the width of the unit code will affect the positioning accuracy. The three parameters restrict each other, and there is a coupling optimal solution. The optimal working state can be obtained through parameter analysis, so as to provide the design and installation parameter guidance of mask. The proposed research can help the practical application of absolute positioning measurement.Keywords
This publication has 36 references indexed in Scilit:
- Three-dimensional micro-displacement measurement method based on capacitance-grating sensorMeasurement, 2022
- A survey on the grating based optical position encoderOptics & Laser Technology, 2021
- Total error compensation of non-ideal signal parameters for Moiré encodersSensors and Actuators A: Physical, 2019
- A two-axis Lloyd's mirror interferometer for fabrication of two-dimensional diffraction gratingsCIRP Annals, 2014
- A high performance one-dimensional homodyne encoder and the proof of principle of a novel two-dimensional homodyne encoderPrecision Engineering, 2013
- A six-degree-of-freedom surface encoder for precision positioning of a planar motion stagePrecision Engineering, 2013
- A three-axis autocollimator for detection of angular error motions of a precision stageCIRP Annals, 2011
- Design and construction of a two-degree-of-freedom linear encoder for nanometric measurement of stage position and straightnessPrecision Engineering, 2010
- Detection of three-axis angles by an optical sensorSensors and Actuators A: Physical, 2009
- Real time surface morphology analysis of semiconductor materials and devices using 4D interference microscopyJournal of Materials Science: Materials in Electronics, 2007