Evaluation of the effectiveness of the introduction of a discrete filler in the aluminum matrix melt
Open Access
- 1 November 2019
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 683 (1) , 012034
Abstract
Experimental samples of metallic composite materials filled with discrete Al2O3 fibers with a diameter of 10–20 nm were obtained by liquid-phase mechanical mixing. A technology has been developed for the effective introduction of a discrete filler into an aluminum melt, which ensures the absorption of the filler by the matrix. Device for the introduction of the filler was designed and manufactured. Recommendations were given on the choice of the composition and technological regimes for the introduction of a light discrete component of a composite material for sufficient assimilation by its matrix and ensuring the homogeneity of the structure. The structure and properties of the obtained samples of the new material have been studied. The changes made by the introduction of the selected nanodiscrete filler into the aluminum melt and the changes made by additional technological methods are analyzed. The effect of introducing discrete Al2O3 fibers into an aluminum melt was demonstrated.Keywords
This publication has 16 references indexed in Scilit:
- Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene – A reviewComposites Part B: Engineering, 2015
- Fabrication of nano-sized Al2O3 reinforced casting aluminum composite focusing on preparation process of reinforcement powders and evaluation of its propertiesComposites Part B: Engineering, 2013
- Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheetsMaterials Science and Engineering: R: Reports, 2013
- Nano-sized aluminum oxide reinforced commercial casting A356 alloy matrix: Evaluation of hardness, wear resistance and compressive strength focusing on particle distribution in aluminum matrixComposites Part B: Engineering, 2013
- Fabrication and study on mechanical properties and fracture behavior of nanometric Al2O3 particle-reinforced A356 composites focusing on the parameters of vortex methodMaterials & Design (1980-2015), 2013
- Metal Matrix Composites2013
- Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processesMaterials & Design (1980-2015), 2012
- Service properties of aluminum-matrix precipitation-hardened composite materials and the prospects of their use on the modern structural material marketRussian Metallurgy (Metally), 2011
- Development of high-performance A356/nano-Al2O3 compositesMaterials Science and Engineering: A, 2009
- Metal matrix composites – From science to technological significanceComposites Science and Technology, 2005