Direct Upcycling of Degraded LiCoO2 Material Toward High‐Performance Single‐Crystal NCM Cathode
Authors:
- 21 July 2024
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (2)
Abstract
The growing volume of spent lithium‐ion batteries (LIBs) with degraded LiCoO2 (D‐LCO) cathodes is arising as an environmental concern as well as a waste of strategic resources. Current recycling strategies for D‐LCO materials primarily focus on metal extractions (Li and Co), which produce large quantities of wastewater and waste residues and consume substantial amounts of energy. Inspiringly, the rapid proliferation of electric vehicles has catalyzed the ever‐increasing production of LIBs with ternary layered oxides as the prevalent cathode materials. Herein, this work reports a simple, green, and economic upcycling strategy for direct transformation of D‐LCO into high‐performance single‐crystal LiNi1/3Co1/3Mn1/3O2 (NCM111) cathode materials. By simultaneous lithium replenishment, particle size reduction, and chemical composition engineering in the upcycling process, the NCM111 product delivers a high specific capacity (159.0 mAh g−1 at 0.1 C) and an excellent cycling stability (82.1% retention after 200 cycles at 1 C), outperforming those of commercial materials. This work highlights the immense potential of upcycling strategies in mitigating the environmental ramifications of spent LIBs and paves the way for the sustainable development of LIBs industry.Keywords
Funding Information
- National Natural Science Foundation of China (22375081, U21A20500)
- Nanchang University
- Natural Science Foundation of Jiangxi Province (20212ACB204016)
This publication has 56 references indexed in Scilit:
- Fast Li Replenishment Channels‐Assisted Recycling of Degraded Layered Cathodes with Enhanced Cycling Performance and Thermal StabilityAdvanced Materials, 2024
- Direct Upcycling of Leached FePO4 from Spent Lithium‐Ion Batteries toward Gradient‐Doped LiMnxFe1−xPO4 Cathode MaterialAdvanced Energy Materials, 2023
- Upcycling of Degraded LiCoO2 Cathodes into High‐Performance Lithium‐Ion Batteries via a Three‐In‐One StrategyAdvanced Energy Materials, 2023
- Scalable Direct Recycling of Cathode Black Mass from Spent Lithium‐Ion BatteriesAdvanced Energy Materials, 2022
- Pushing Lithium Cobalt Oxides to 4.7 V by Lattice‐Matched Interfacial EngineeringAdvanced Energy Materials, 2022
- Phase Behavior during Electrochemical Cycling of Ni‐Rich Cathode Materials for Li‐Ion BatteriesAdvanced Energy Materials, 2020
- Direct Recycling of Spent NCM Cathodes through Ionothermal LithiationAdvanced Energy Materials, 2020
- An Overview on the Advances of LiCoO2 Cathodes for Lithium‐Ion BatteriesAdvanced Energy Materials, 2020
- An In Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle PerformancesAdvanced Energy Materials, 2020
- Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion BatteriesAdvanced Energy Materials, 2013