Local Stress Analysis of IGBTs Softly-Driven by Frequency Sweep in Induction Hobs
Open Access
- 16 March 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (8) , 12815-12827
Abstract
Die-level electrical stress caused by current crowding is investigated in Insulated Gate Bipolar Transistors (IGBTs) outside zero-voltage switching (ZVS) operation. This stress occurs during the turn-on phase of an induction cooking resonant inverter, where the switching frequency sweeps from 150 to 50 kHz. The stress is monitored on a sub 100 μs timescale with a 10 μm lateral resolution using an infrared (IR) thermographic setup. To improve signal-to-noise ratio and time resolution, a Fourier based time reconstruction strategy is applied. Electrothermal SPICE simulations complement the interpretation of measurements, providing insights into current crowding under such stressful operating conditions. The analysis under soft-start conditions reveals two key findings. First, heat dissipation, and consequently current conduction, present a time dependent two-dimensional distribution, with hotspots forming in low-impedance regions detectable via IR thermography. Second, in this non-homogeneous current distribution, the SPICE electrothermal model predicts the most frequently occurring value of the temperature distribution (statistical mode) across the active area more accurately than the mean value. This observation may establish a link to the concept of junction temperature, which is traditionally derived using thermo-sensitive electrical parameters.Keywords
Funding Information
- GRIDCELLS Project (PID2021-126334OB-I00)
- GRIDCELLS Project (PCI2020-112028)
- GRIDCELLS Project (H2020-ECSEL)
- GRIDCELLS Project (662133)
- Agència de Gestió d'Ajuts Universitaris i de Recerca (2021-SGR-00496)
- POWERCELLS Project (PID2024-160767OB-I00)
- SAFEPOWER Project (101172940)
This publication has 29 references indexed in Scilit:
- Energy saving starts in the kitchenEnergy and Buildings, 2024
- An Investigation on Energy Efficiency of Infrared and Induction Cooktops2021
- Multiple-Output ZVS Resonant Inverter Architecture for Flexible Induction Heating AppliancesIEEE Access, 2019
- Physical and Technical Basics2018
- TCAD simulation of current filamentation in adjacent IGBT cells under turn-on and turn-off short circuit conditionMicroelectronics Reliability, 2015
- Optimisation of the reverse conducting IGBT for zero‐voltage switching applications such as induction cookersIET Circuits, Devices & Systems, 2014
- Spatially and frequency-resolved monitoring of intradie capacitive coupling by heterodyne excitation infrared lock-in thermographyApplied Physics Letters, 2013
- Irradiance-based emissivity correction in infrared thermography for electronic applicationsReview of Scientific Instruments, 2011
- A heterodyne method for the thermal observation of the electrical behavior of high-frequency integrated circuitsMeasurement Science and Technology, 2008
- Impact of IGBT behavior on design optimization of soft switching inverter topologiesIEEE Transactions on Industry Applications, 1995