Performance of a transfer beam with hybrid reinforcement of CFRP bars and steel bars under reversed cyclic loading
Open Access
- 19 December 2015
- journal article
- research article
- Published by Walter de Gruyter GmbH in Science and Engineering of Composite Materials
- Vol. 24 (4) , 621-630
Abstract
Hybrid carbon fiber reinforced plastic (CFRP) and steel bar reinforcement concrete were applied in a transfer beam. Three specimens (ZHL-2, ZHL-3, and ZHL-4) corresponded to different forms of reinforcement, reinforcement ratio, and reinforced root number, respectively. The pseudo static test of the three specimens was carried out under the condition of vertical loading and horizontal reversed cyclic loading. The flexural property and failure mode of the transfer beams were demonstrated. Further, the ductility, energy dissipation capability, hysteretic characteristics, structural yield mechanism, and failure mechanism were also studied. The exploration of these factors was aimed to study the bearing capacity and seismic performance of the transfer beam with hybrid CFRP and steel bars. The test results show that if both the upper and lower longitudinal reinforcements were replaced by CFRP bars with a symmetrical reinforcement, the mechanical property and deformation performance would be superior. The performance would be better than the reinforcements with single upper and lower replacement by CFRP bars. Both the upper and lower longitudinal bars of the transfer beam should be replaced by CFRP bars with a symmetrical form of reinforcement. The ductility performance would be better for the transfer beam with the hybrid reinforcement of CFRP bars and steel bars. It showed a seismic performance. The transfer beam with the hybrid reinforcement of CFRP bars and steel bars could meet the design requirements for the ductile frame “strong column, weak beam and strong node.”Keywords
This publication has 25 references indexed in Scilit:
- Finite element modeling of reinforced concrete beams with a hybrid combination of steel and aramid reinforcementMaterials & Design (1980-2015), 2015
- Nonlinear Behavior and Simulation of Concrete Columns Reinforced by Steel-FRP Composite BarsJournal of Bridge Engineering, 2014
- Experimental response and code modelling of continuous concrete slabs reinforced with BFRP barsComposite Structures, 2014
- Evaluation of bond stress-slip models for FRP reinforcing bars in concreteComposite Structures, 2014
- Reliability-based design recommendations for FRP-reinforced concrete beamsEngineering Structures, 2013
- Flexural durability of FRP bars embedded in fiber-reinforced-concreteConstruction and Building Materials, 2013
- Seismic performance of concrete columns reinforced with hybrid shape memory alloy (SMA) and fiber reinforced polymer (FRP) barsConstruction and Building Materials, 2012
- Evaluation of Flexural Behavior and Serviceability Performance of Concrete Beams Reinforced with FRP BarsJournal of Composites for Construction, 2011
- Influence of fibers on flexural behavior and ductility of concrete beams reinforced with GFRP rebarsEngineering Structures, 2011
- Flexural behaviour of indeterminate concrete beams reinforced with FRP barsEngineering Structures, 2008