Multi-objective optimization of FDM process parameters for 3D-printed polycarbonate using Taguchi-based Gray Relational Analysis
Top Cited Papers
Open Access
- 17 March 2025
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 137 (7-8) , 3709-3725
Abstract
This paper investigates the effects of 3D printing parameters on tensile strength (TS), material consumption (MC), and build time (BT) of polycarbonate (PC) specimens fabricated using fused deposition modelling (FDM) technology. The print parameters considered were layer thickness, print speed, print temperature, infill density, and line width. Taguchi and Analysis of Variance methods were applied separately to analyze the individual impact of the selected printing parameters on the evaluated properties. Furthermore, a Taguchi-based Gray Relational Analysis approach was utilized for simultaneous multi-objective optimization to maximize TS while minimizing MC and BT. The individual optimization results revealed that infill density and layer thickness were the most influential parameters to maximize TS, infill density to minimize MC, and layer thickness and line width to minimize BT. Through multi-objective optimization, a series of optimal printing parameters were identified including 0.3 mm for layer thickness, a 50 mm/min print speed, a print temperature of 270 °C, a 100% infill density, and line width of 0.5 mm. Printing with these optimized parameters led to negligible increases in MC and BT, while significantly enhancing TS with an improvement of approximately 141% compared to those manufactured using the initial parameter set. This improvement was achieved along with only a small improvement in the Gray Relational Grade of around 1%. The findings of this paper provide valuable insights for the multi-objective optimization of PC material in FDM-based additive manufacturing, supporting its applications across various emerging areas such as body armor and printed electronics applications.Keywords
This publication has 49 references indexed in Scilit:
- Mechanical performance optimization in FFF 3D printing using Taguchi design and machine learning approach with PLA /walnut Shell composites filamentsJournal of Vinyl and Additive Technology, 2025
- Optimization of process parameters in 3D printing of polycarbonate for high heat applicationsInteractions, 2024
- Multi‐objective optimization of 3D printing process parameters using gray‐based Taguchi for composite PLA partsPolymer Composites, 2024
- Application of artificial neural network to evaluation of dimensional accuracy of 3D‐printed polylactic acid partsJournal of Polymer Science, 2024
- The investigation of printing parameters effect on tensile characteristics for triply periodic minimal surface designs by TaguchiPolymer Engineering & Science, 2023
- Shape memory performance assessment of FDM 3D printed PLA-TPU composites by Box-Behnken response surface methodologyThe International Journal of Advanced Manufacturing Technology, 2023
- Multi-response Optimization of FDM Process Parameters Using Taguchi Based Grey Relational Analysis Method2023
- Development of Pure Poly Vinyl Chloride (PVC) with Excellent 3D Printability and Macro‐ and Micro‐Structural PropertiesMacromolecular Materials and Engineering, 2022
- Statistical and Experimental Analysis of Process Parameters of 3D Nylon Printed Parts by Fused Deposition Modeling: Response Surface Modeling and OptimizationJournal of Materials Engineering and Performance, 2021
- Additive Manufacturing Technologies2021