Influence of Spray Drying Conditions on Residue Accumulation—Simulation Using CFD
Authors:
- Athanasia M. GoulaAGAthanasia M. Goula
- Konstantinos G. AdamopoulosKAKonstantinos G. Adamopoulos
- 31 December 2004
- journal article
- Published by Taylor & Francis in Drying Technology
- Vol. 22 (5) , 1107-1128
Abstract
The Computational Fluid Dynamics code FLUENT 5.3 is used to study how changes in spray drying operating conditions can affect the fouling of the equipment during drying. A set of experiments was conducted on a laboratory spray dryer keeping constant the feed rate, the feed temperature, the air inlet temperature and the atomizer pressure, and varying the compressed air flow rate and the flow rate of drying air. This set of data was simulated using the CFD package FLUENT 5.3. The same trends were observed between experimental data and the simulations in terms of the effects of the investigated parameters. Residue accumulation increased with decreases of compressed air flow rate and flow rate of drying air. The simulation results give a better understanding of several phenomena that appear during spray drying and can sharply reduce the number of experiments needed to find a solution to the fouling problem.Keywords
This publication has 12 references indexed in Scilit:
- Spray Drying Performance of a Laboratory Spray Dryer for Tomato Powder PreparationDrying Technology, 2003
- Prospects for the Modelling and Design of Spray Dryers in the 21st CenturyDrying Technology, 2003
- Spray drying of food ingredients and applications of CFD in spray dryingChemical Engineering and Processing - Process Intensification, 2001
- Spray drying of food products: 1. Simulation modelJournal of Food Engineering, 1999
- SIMULATION OF SPRAY DRYING IN SUPERHEATED STEAM USING COMPUTATIONAL FLUID DYNAMICSDrying Technology, 1999
- A SEMI-EMPIRICAL APPROACH TO OPTIMISE THE QUANTITY OF DRYING AIDS REQUIRED TO SPRAY DRY SUGAR-RICH FOODSDrying Technology, 1997
- Measurement and Modelling of the Air Flow Pattern in a Pilot-Plant Spray DryerChemical Engineering Research and Design, 1997
- SCALE-UP OF SPRAY DRYERSDrying Technology, 1994
- Air temperature and humidity profiles in spray drying. 1. Features predicted by the particle source in cell modelIndustrial & Engineering Chemistry Research, 1988
- An investigation of particle trajectories in two-phase flow systemsJournal of Fluid Mechanics, 1972