Rationally Designed Staged Posttensioning to Abate Reflective Cracking on Side-by-Side Box-Beam Bridge Decks
Authors:
- 1 January 2010
- journal article
- research article
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2172 (1) , 87-95
Abstract
Side-by-side box-beam bridges are often used at sites with tight under-clearance requirements and specified for accelerated construction. However, longitudinal reflective deck cracking is a recurring problem for these bridges and it raises concern for their durability and long-term safety. North American practices of the transverse connection design of this particular bridge are discussed in NCHRP Synthesis 393, and the Michigan design is presented as the preferred procedure. The most recent design in Michigan is an empirical procedure that incorporates the majority of the Synthesis 393 recommended best practices. Yet reflective deck cracking persists. A rational design procedure for which an analysis model was developed is presented here. In the rational design procedure, the analysis model is utilized to calculate the moment demand along the transverse joints. A two-stage transverse posttensioning procedure is recommended following AASHTO load and resistance factor design stipulations based on the moment demand calculated from the analysis model. The second stage of posttensioning precompresses the cast-in-place concrete deck, ensuring crack control. The objective of this study is to demonstrate the effectiveness of the two-stage posttensioning design and implementation procedure to mitigate reflective deck cracking. The effectiveness of the recommended design is demonstrated by utilizing a multistep finite element simulation of the construction process under construction and service loads. The cracking potential of the deck is evaluated under both current Michigan Department of Transportation and the proposed two-stage transverse posttensioning schemes. It is demonstrated that the two-stage posttensioning process can eliminate tensile stresses developed under gravity loading and reduce the temperature load effects to abate reflective deck cracking.Keywords
This publication has 7 references indexed in Scilit:
- Traffic Forces and Temperature Effects on Shear Key Connections for Adjacent Box Girder Bridge2002
- Full-Scale Testing of Shear Keys for Adjacent Box Girder BridgesPCI Journal, 1999
- Performance of Full-Depth Shear Keys in Adjacent Prestressed Box Beam BridgesPCI Journal, 1998
- Transverse Design of Adjacent Precast Prestressed Concrete Box Girder BridgesPCI Journal, 1996
- Shear Key Performance in Multibeam Box Girder BridgesJournal of Performance of Constructed Facilities, 1995
- Short to Medium Span Precast Prestressed Concrete Bridges in JapanPCI Journal, 1994
- Transverse Shear in Multibeam BridgesJournal of Structural Engineering, 1983