Study on low-velocity impact and residual strength at high temperatures of composite laminates
Authors:
- 17 December 2017
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 233 (3) , 1106-1123
Abstract
In this paper, low-velocity impact characteristics and residual tensile/compressive strength of composite laminates at high temperatures are experimentally and analytically investigated. Low-velocity impact tests at room temperature were performed using a drop-weight apparatus, and residual strength tests at high temperatures were performed using a hydraulic MTS machine. The experimental results show that both residual tensile and compressive strength decrease monotonically with the increase of impact energy, while the variation trend of residual tensile/compressive strength of composite laminates keeps the same with longitudinal tensile/compressive strength with the increase of temperature. In addition, a new stress-based delamination failure criterion was established, in which the delamination is considered to be controlled by the difference between through-thickness stresses of adjacent layers. Once delamination occurs, only the elements below the interface are marked with delamination, whereas the material properties of the elements on both sides of the interface are reduced simultaneously. In this way, delamination can be defined more precisely without cohesive elements, and a considerable reduction in CPU time can be achieved. Combined with extended Hashin failure criteria, an integrated finite element model was established to simulate low-velocity impact damage and to predict residual tensile and compressive strength of composite laminates. The numerical results show good agreements with experimental data.Keywords
This publication has 23 references indexed in Scilit:
- Effect of temperature and hybridisation on the low velocity impact behavior of hemp-basalt/epoxy compositesComposite Structures, 2015
- A non-linear orthotropic hydrocode model for ultra-high molecular weight polyethylene in impact simulationsInternational Journal of Impact Engineering, 2015
- Numerical study for the structural analysis of composite laminates subjected to low velocity impactComposites Part B: Engineering, 2014
- Modelling the simulation of impact induced damage onset and evolution in compositesComposites Part B: Engineering, 2014
- Ply level failure prediction of carbon fibre reinforced laminated composite panels subjected to low velocity drop-weight impact using adaptive meshing techniquesActa Astronautica, 2014
- Damage and Failure of Laminated Carbon-Fiber-Reinforced Composite under Low-Velocity ImpactJournal of Aerospace Engineering, 2014
- Analytical and experimental studies on the low-velocity impact response and damage of composite laminates under in-plane loads with structural damping effectsComposites Science and Technology, 2010
- Compressive residual strength at low temperatures of composite laminates subjected to low-velocity impactsComposite Structures, 2008
- Temperature effects on Kevlar/hybrid and carbon fiber composite sandwiches under impact loadingComposite Structures, 2007
- Prediction of impact damage in composite platesComposites Science and Technology, 2000