A Mechanical Approach to the Determination of the Geometry of a Woven Fabric and to the Analysis of Subsequent Changes in This Geometry Part I: A Theory for the Crimping of the Weft Yarn during Weaving
Author:
- 1 January 1989
- journal article
- research article
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 80 (4) , 507-520
Abstract
The problem of the weft yarn acquiring crimp during the process of weaving is simulated by the deformation of an elastic rod of known length, fixed at both ends and loaded by a point force in the middle. Two analyses, one based on large deformations, the other on an approximate linear theory, which take into account both bending and longitudinal extension, are carried out and tested experimentally on a physical-simulation model. It is also shown that both theories can be applied to real yarns.Keywords
This publication has 7 references indexed in Scilit:
- 1—THE INITIAL LOAD–EXTENSION BEHAVIOUR OF PLAIN-WOVEN FABRICSThe Journal of the Textile Institute, 1980
- 3—THE FINITE-DEFORMATION THEORY OF PLAIN-WEAVE FABRICS PART I: THE BIAXIAL-DEFORMATION THEORYThe Journal of the Textile Institute, 1973
- The Mechanical Properties of Woven FabricsTextile Research Journal, 1966
- 49—A GENERAL MODEL OF A FABRIC AS A GEOMETRIC-MECHANICAL STRUCTUREJournal of the Textile Institute Transactions, 1964
- 9—THE RELATION BETWEEN FIBRE AND YARN FLEXURAL RIGIDITY IN CONTINUOUS FILAMENT VISCOSE YARNSJournal of the Textile Institute Transactions, 1950
- 5—THE GEOMETRY OF CLOTH STRUCTUREJournal of the Textile Institute Transactions, 1937
- 26—THE “HANDLE” OF CLOTH AS A MEASURABLE QUANTITYJournal of the Textile Institute Transactions, 1930