Research on fractal characteristics of sealing interface during DSPHMS start-up stage
Authors:
Open Access
- 31 January 2025
- journal article
- Published by Oxford University Press (OUP) in Journal of Mechanics
- Vol. 41, 299-312
Abstract
Establishing the contact mechanics model during the start-up stage is an important step in studying the sealing mechanism of non-contact mechanical seals during the start-up and stop stages. This paper takes the diffuser self-pumping hydrodynamic mechanical seal (DSPHMS) as the research object, characterizes its sealing interface morphology characteristics based on fractal contact theory, and establishes an unload fractal contact model for the sealing interface during the start-up process. Through numerical calculations, the changes in the real contact area and porosity of the sealing interface during the start-up process concerning morphology parameters, material characteristic parameters and end face loads were analyzed. The relationship between porosity and initial porosity after complete unloading of the contact interface was compared, the influence of morphology parameters on the deformation of the asperities was explored, and the porosity of the sealing interface during the DSPHMS start-up process was calculated. The results show that during the start-up process, when the scale coefficient G takes a larger value, the porosity increases with the fractal dimension D, and D has a promoting effect on the elastic-plastic deformation of the asperity. When G takes a smaller value, as D increases, the porosity first increases and then decreases, and D has an inhibitory effect on the elastic-plastic deformation of the asperity. The larger D, the smaller G and the larger the real contact area. The yield limit of the material has no effect on the real contact area and porosity. The larger the elastic modulus, the smaller the real contact area and the higher the porosity. During the start-up process of DSPHMS, the porosity of the sealing interface changes rapidly and eventually exceeds the percolation threshold of 0.312.Keywords
Funding Information
- National Natural Science Foundation of China (52075268)
- Key R&D projects of Jiangsu Province (BE2021062)
This publication has 21 references indexed in Scilit:
- The in-plane elastic-plastic response of hierarchical honeycombs with sandwich wallsEuropean Journal of Mechanics - A/Solids, 2025
- Numerical and experimental investigations into characteristics of liquid film seals featuring various groove shapes based on super-slip groove designTribology International, 2024
- Numerical investigation on a hybrid Porous-Spiral Groove Mechanical Face SealTribology International, 2024
- Study on the Friction Behavior and Abnormal Conditions of Non-contact Mechanical Seal Based on Acoustic EmissionTribology Letters, 2024
- Effect of formulation method for plastic deformation rate on topology optimization considering elastic-plastic behaviorEuropean Journal of Mechanics - A/Solids, 2024
- Analysis of the coupling mechanism of the dynamic response and mechanical-thermal deformation in mechanical sealsTribology International, 2024
- Influence of inlet pressure disturbance on transient performance of liquid oxygen lubricated mechanical seal and rub-impact phenomenon caused by excitation overloadTribology International, 2022
- Percolation interpretation of film pressure forming mechanism of mechanical seal and calculation method of film pressure coefficientTribology International, 2022
- A Microcontact Model Developed for Asperity Heights with a Variable Profile Fractal Dimension, A Surface Fractal Dimension, Topothesy, and Non-Gaussian DistributionJournal of Mechanics, 2009
- Unloading of an elastic–plastic loaded spherical contactInternational Journal of Solids and Structures, 2005