Automatic Structural Identification and Vibration Suppression of Industrial Robots using a Custom Active Damper
Authors:
- 27 November 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1033-1038
Abstract
Industrial robots experience low frequency vibrations at the tool induced by rapid movements, base vibrations, and process forces. In precision applications such as robotic machining, tool vibrations can lead to poor surface finish and tolerance violation. Active vibration control can suppress vibrations in real time and increase a robot’s dynamic stiffness provided the structural modes of the robot are accurately known. This paper presents a custom active damper that is capable of both automatic frequency response function (FRF) measurement and active vibration control. The active damper, which consists of a linear voice coil actuator, moving mass, and on-board accelerometer, excites the structural modes of the robot by applying a sine sweep force input. A dynamic model is derived from the FRF, which allows for efficient tuning of the direct velocity feedback controller within a simulation environment. The performance of the active damper is experimentally validated on a Staubli RX90CR industrial robot. Experimental results show a significant reduction of the dominant structural mode subject to hammer tests and base vibrations.Keywords
This publication has 12 references indexed in Scilit:
- Modelling the dynamics of industrial robots for milling operationsRobotics and Computer-Integrated Manufacturing, 2020
- Identification of industrial robot frequency response function for robotic milling using operational modal analysisProcedia Manufacturing, 2020
- A review of chatter vibration research in millingChinese Journal of Aeronautics, 2019
- Mode coupling chatter suppression for robotic machining using semi-active magnetorheological elastomers absorberMechanical Systems and Signal Processing, 2019
- Modeling of flange-mounted force sensor frequency response function for inverse filtering of forces in robotic millingProcedia Manufacturing, 2019
- Robots in machiningCIRP Annals, 2019
- Preshaping input trajectories of industrial robots for vibration suppressionRobotics and Computer-Integrated Manufacturing, 2018
- Active Vibration Control for Robotic Machining2017
- Automatic tuning of active vibration control systems using inertial actuatorsCIRP Annals, 2017
- Natural Frequency Analysis in the Workspace of a Six-Axis Industrial Robot Using Design of ExperimentsAdvanced Materials Research, 2016