Field determination of mechanical aperture, entry pressure and relative permeability of fractures using NAPL injection
Authors:
- 1 February 2006
- journal article
- Published by Emerald Publishing in Géotechnique
- Vol. 56 (1) , 27-38
Abstract
An in situ field technique has been developed and implemented to measure non-aqueous phase liquid (NAPL) entry pressure and subsequently estimate mechanical aperture variability in an undisturbed, water-saturated rock fracture. The field experiment also provided the opportunity to measure wetting phase relative permeability at residual non-wetting phase saturation, kw,r(Snw,r). The radial aperture determination by the injection of oil (RADIO) method employs a constant-rate injection of a non-toxic NAPL into a fracture isolated by a double packer array. Injection pressures are recorded to provide a characteristic signature that is interpreted to reveal aperture enlargements and constrictions several metres from the borehole. Fracture aperture values are calculated by reverse modelling of the pressure signatures using the FRACAS fully compositional two-phase flow model. Pre-NAPL injection hydraulic testing established a baseline dataset of hydraulic apertures ranging from 26 μm to 259 μm with a mean value of 86 μm. Post-NAPL injection hydraulic testing gave kw,r(Snw,r) values ranging from 0·04 to 0·39 with a mean value of 0·15. Numerical modelling calculated fracture mechanical apertures vary from 36 μm to >1000 μm in test 1, and from 46 μm to >1000 μm in test 2. Single-value approximations of volume-averaged fracture apertures are two to three times larger than the respective hydraulic apertures, suggesting that volume balance calculations using the hydraulic aperture may overpredict NAPL penetration distances.Keywords
This publication has 27 references indexed in Scilit:
- Evaluation of cubic law based models describing single‐phase flow through a rough‐walled fractureWater Resources Research, 2004
- Trichloroethene DNAPL flow and mass distribution in naturally fractured clay: Evidence of aperture variabilityWater Resources Research, 2000
- Saturated flow in a single fracture: evaluation of the Reynolds Equation in measured aperture fieldsWater Resources Research, 1999
- Investigation of flow in water‐saturated rock fractures using nuclear magnetic resonance imaging (NMRI)Water Resources Research, 1999
- The Influence of Waterflood Design on the Recovery of Mobile DNAPLsGroundwater, 1998
- Hydraulic pulse testing of single fractures in porous and deformable hard rocksQuarterly Journal of Engineering Geology, 1996
- On the relationship between mechanical and hydraulic apertures in rough‐walled fracturesJournal of Geophysical Research, 1995
- Laboratory measurement of capillary pressure‐saturation relationships in a rock fractureWater Resources Research, 1994
- Usage of “Equivalent apertures” for rock fractures as derived from hydraulic and tracer testsWater Resources Research, 1992
- Characteristics of the Permian and Triassic aquifers of south-west ScotlandQuarterly Journal of Engineering Geology, 1988