A design optimization study of an air-cooling battery thermal management system for electric vehicles
- 1 August 2022
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 237 (4) , 1125-1136
Abstract
Air cooling is a highly cost-effective method for the battery thermal management systems due to its simple structure, high reliability and low maintenance cost. Different from other designs of only a single inlet/outlet structure in the literature, an air-cooling battery thermal management system with multiple inlets/outlets design was proposed in this paper. The effects of inlet/outlet positions and dimensions on the air-cooling battery thermal management system performance were thoroughly evaluated and compared. The optimal inlet/outlet position and dimension were identified based on the maximum battery temperature and the temperature uniformity in the air cooling field. The results showed that the symmetrical double inlets/outlets design (Design 4) delivered the top temperature uniformity with the lowest energy consumption. During 1C discharging at 2 m/s inlet airflow, the maximum temperature and temperature difference of the Design 4 were 1.01 K and 2.24 K lower than those of the basic Design 0 in addition to a pressure difference reduction of 7.85 Pa. Based on the optimal Design 4, 0.03 m outlet width could further reduce the maximum temperature and temperature difference by 0.47 K and 0.28 K than the worst 0.05 m design. Furthermore, 52 additional simulations under different operating conditions had proven that the superb cooling performance of the optimal design during mild discharging operations (0.5–1C).Keywords
Funding Information
- Australian Research Council (LP170100879)
This publication has 28 references indexed in Scilit:
- Configuration optimization of battery pack in parallel air-cooled battery thermal management system using an optimization strategyApplied Thermal Engineering, 2017
- Transient electrochemical heat transfer modeling and experimental validation of a large sized LiFePO4/graphite batteryInternational Journal of Heat and Mass Transfer, 2017
- Experimental and modeling study of controller-based thermal management of battery modules under dynamic loadsInternational Journal of Heat and Mass Transfer, 2016
- Thermal Management of Densely-packed EV Battery with Forced Air Cooling StrategiesEnergy Procedia, 2016
- The numerical investigation of nanofluid based cylinder battery thermal management using lattice Boltzmann methodInternational Journal of Heat and Mass Transfer, 2015
- Three dimensional thermal-, electrical-, and electrochemical-coupled model for cylindrical wound large format lithium-ion batteriesJournal of Power Sources, 2013
- A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehiclesJournal of Power Sources, 2013
- Field synergy analysis and optimization of decontamination ventilation designsInternational Journal of Heat and Mass Transfer, 2008
- Accurate electrical battery model capable of predicting runtime and I-V performanceIEEE Transactions on Energy Conversion, 2006
- Battery thermal models for hybrid vehicle simulationsJournal of Power Sources, 2002