Influence of fiber orientation on high stress wear behavior of sisal fiber‐reinforced epoxy composites
Authors:
- 2 July 2007
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 28 (4) , 437-441
Abstract
Sisal fiber‐reinforced epoxy composites having three different fiber orientations, namely LL, LT, TT mentioned in the text were prepared and tested for their high stress abrasive wear behavior. Effect of fiber orientation, sliding distance, and load on abrasive wear of sisal–epoxy composites have been determined. Wear data of composites have been compared with the pure epoxy. Incorporation of fibers decreases the wear rate of epoxy resin, which varies with the fiber orientation. Wear rate in case of TT composite is found minimum as compared to other two composites. Wear rate follows the following trend, WTT < WLT < WLL. Owing to minimum exposed area of fiber to the sliding asperities, lowest wear rate occurs in the case of TT composite. Increase of load and sliding distance increases the wear volume in all the composites, because of the progressive loss of material. Wear mechanism has been discussed by using SEM micrographs of the worn surfaces. POLYM. COMPOS., 28:437–441, 2007. © 2007 Society of Plastics Engineers.Keywords
This publication has 14 references indexed in Scilit:
- Effect of coupling agent on abrasive wear behaviour of chopped jute fibre-reinforced polypropylene compositesWear, 2006
- Friction and sliding wear of UHMWPE modified cotton fibre reinforced polyester compositesTribology Letters, 2006
- Morphology and mechanical properties of unidirectional sisal– epoxy compositesJournal of Applied Polymer Science, 2002
- The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy compositesComposites Science and Technology, 2001
- Composites reinforced with cellulose based fibresProgress in Polymer Science, 1999
- Influence of interfacial adhesion on the mechanical properties and fracture behaviour of short sisal fibre reinforced polymer compositesEuropean Polymer Journal, 1996
- Abrasive wear behaviour of bambooTribology International, 1995
- Effects of fiber orientation and humidity on friction and wear properties of graphite fiber compositesWear, 1992
- The effect of unidirectional cotton fibre reinforcement on the friction and wear characteristics of polyesterWear, 1986
- The abrasive wear of short fibre compositesComposites, 1985