Characterization of internal thermohydraulic flow and heat transfer improvement in a three‐dimensional circular corrugated tube surfaces based on numerical simulation and design of experiment
- 28 March 2022
- journal article
- research article
- Published by Wiley in Heat Transfer
- Vol. 51 (5) , 4688-4713
Abstract
To meet the requirements of development in heat exchangers design, the effect of different tubes geometrical parameters on its flow field analysis and thermal heat transfer performance are investigated in the current research work. The hydraulic thermal fluid coupling with computational simulations is applied. The numerical results are solving used flow transport and heat transfer equations, then these results are validated with available experimental data. The behavior of hydraulic and thermal flow in the corrugated tube is discussed with different geometrical parameters' position and shape. Turbulent flow in the tube is calculated in three‐dimensional numerical simulations with optimization of a multiobjective algorithm are analyzed. The influences of various design parameters, for instance, the number of corrugated rings around the tube, distance between each corrugated ring, the diameter of the ring, and pitch of ring are investigated firstly in the flow field and then optimized by using the design of experiment (DOE). The influence of flow structural modifications such as static pressure, dynamic pressure, and pressure drop is taken into consideration as analyzed performance parameters. The DOE method is investigated based on implements and variances the L16 orthogonal arrays are chosen as the experimental strategy. Furthermore, the optimization results found that the maximum value of pressure difference was for corrugated diameter. The numerical method using DOE has enhanced heat transfer rate as compared to the smooth pipe. Moreover, the minimum Tout is for Case 11 (296.49°C) and the maximum Tout is for (303.10°C) hence the value of Nu number for both cases is 32.9 and 42, respectively. That means using this type of passive device can improve the heat transfer in the pipe. The outcomes illustrate that the performance evaluation factor (PEF) ratio of the corrugated pipe with different geometrical configurations is changed and increased as the corrugated pipe geometrically changed and the value of PEF is more than 1.3.Keywords
All Related Versions
This publication has 28 references indexed in Scilit:
- Multi-objective optimization of corrugated tube with loose-fit twisted tape using RSM and NSGA-IIInternational Journal of Heat and Mass Transfer, 2019
- Optimization investigation on configuration parameters of sine wavy fin in plate-fin heat exchanger based on fluid structure interaction analysisInternational Journal of Heat and Mass Transfer, 2019
- Multi-objective optimization of the dimple/protrusion channel with pin fins for heat transfer enhancementInternational Journal of Numerical Methods for Heat & Fluid Flow, 2019
- Compact Heat Exchangers – Analysis, Design and Optimization using FEM and CFD Approach2018
- Effect of geometrical parameters on turbulent flow and heat transfer behaviors in triple-start corrugated tubesJournal of Thermal Science and Technology, 2018
- Economic optimization design for shell-and-tube heat exchangers by a Tsallis differential evolutionApplied Thermal Engineering, 2017
- Heat transfer enhancement in a corrugated tube heat exchangerUkrainian Food Journal, 2016
- Parametric optimization of overlapped helical baffled heat exchangers by Taguchi methodApplied Thermal Engineering, 2015
- Multi-objective shape optimization of double pipe heat exchanger with inner corrugated tube using RSM methodInternational Journal of Thermal Sciences, 2015
- Numerical Simulation and Structure Optimization on the Corrugated Tubes of a Double Pipe Heat ExchangerApplied Mechanics and Materials, 2013