Crystallization behavior of fully biodegradable poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) blends
Authors:
- 12 March 2009
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 112 (6) , 3754-3763
Abstract
Both poly(lactic acid) (PLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) are fully biodegradable polyesters. The disadvantages of poor mechanical properties of PLA limit its wide application. Fully biodegradable polymer blends were prepared by blending PLA with PBAT. Crystallization behavior of neat and blended PLA was investigated by differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and wide angle X‐ray diffraction (WAXD). Experiment results indicated that in comparison with neat PLA, the degree of crystallinity of PLA in various blends all markedly was increased, and the crystallization mechanism almost did not change. The equilibrium melting point of PLA initially decreased with the increase of PBAT content and then increased when PBAT content in the blends was 60 wt % compared to neat PLA. In the case of the isothermal crystallization of neat PLA and its blends at the temperature range of 123–142°C, neat PLA and its blends exhibited bell shape curves for the growth rates, and the maximum crystallization rate of neat PLA and its blends all depended on crystallization temperature and their component. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009Keywords
This publication has 34 references indexed in Scilit:
- Fully biodegradable blends of poly(l-lactide) and poly(ethylene succinate): Miscibility, crystallization, and mechanical propertiesPolymer, 2007
- Crystal Modifications and Thermal Behavior of Poly(l-lactic acid) Revealed by Infrared SpectroscopyMacromolecules, 2005
- Structural Study of Poly(l-lactic acid) SpherulitesBiomacromolecules, 2003
- Further Evidence of Crystallinity-Induced Biodegradation of Synthetic Atactic Poly(3-hydroxybutyrate) by PHB-Depolymerase A from Pseudomonas lemoignei. Blends of Atactic Poly(3-hydroxybutyrate) with Crystalline PolyestersMacromolecules, 1998
- Miscibility, crystallization and melting of poly(3-hydroxybutyrate)/ poly(l-lactide) blendsPolymer, 1995
- Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibersMacromolecules, 1990
- The theory of phase transition kinetics with growth site impingement. II. Heterogeneous nucleationJournal of Polymer Science: Polymer Physics Edition, 1976
- Theory of phase transition kinetics with growth site impingement. I. Homogeneous nucleationJournal of Polymer Science: Polymer Physics Edition, 1974
- Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactionsColloid and Polymer Science, 1973
- Melting process and the equilibrium melting temperature of polychlorotrifluoroethyleneJournal of Research of the National Bureau of Standards Section A: Physics and Chemistry, 1962