Evaluating three commonly used infiltration methods for permeable surfaces in urban areas using the SWMM and STORM
Authors:
Open Access
- 4 January 2021
- journal article
- research article
- Published by Elsevier in Hydrology Research
- Vol. 52 (1) , 160-175
Abstract
Climate change and urbanization increase the pressure on combined sewer systems in urban areas resulting in elevated combined sewer overflows, degraded water quality in receiving waters, and changing stream flows. Permeable surfaces offer infiltration potential, which can contribute to alleviate the runoff to combined sewer systems. The variation in urban soil characteristics and the initial moisture conditions before a rainfall event are important factors affecting the infiltration process and consequently runoff characteristics. In this study, the urban hydrological models SWMM and STORM are used to evaluate the Green-Ampt, Horton, and Holtan infiltration methods for three urban sandy soils. A sensitivity analysis was carried out on a set of key parameter values. In addition, long-term simulations were conducted to evaluate the ability to account for initial soil moisture content. The results showed that the Holtan method's ability to account for both available storage capacity and maximum infiltration rate, as well as evapotranspiration in the regeneration of infiltration capacity, gave the best result with regard to runoff behaviour, especially for long-term simulations. Furthermore, the results from the urban sandy soils with different infiltration rate at saturation, together with a high sensitivity to the degree of sensitivity for maximum infiltration rate under dry conditions and minimum infiltration rate under wet conditions, indicate that field measurements of infiltration rate should be carried out at saturation for these soils.Keywords
Funding Information
- Norges Forskningsråd (237859)
This publication has 16 references indexed in Scilit:
- Global sensitivity analysis in hydrological modeling: Review of concepts, methods, theoretical framework, and applicationsJournal of Hydrology, 2015
- Calibration and Verification of SWMM for Low Impact DevelopmentJawra Journal of the American Water Resources Association, 2015
- Local sensitivity analysis for compositional data with application to soil texture in hydrologic modellingHydrology and Earth System Sciences, 2013
- Effect of Induced Soil Compaction on Changes in Soil Properties and Wheat Productivity under Sandy Loam and Sandy Clay Loam Soils: A Greenhouse ExperimentCommunications in Soil Science and Plant Analysis, 2012
- Evaluation of some infiltration models and hydraulic parametersSpanish Journal of Agricultural Research, 2010
- The Need for Improved Pervious Land Cover Characterization in Urban WatershedsJournal of Hydrologic Engineering, 2009
- Compaction’s Impacts on Urban Storm-Water InfiltrationJournal of Irrigation and Drainage Engineering, 2008
- Assessment of Three Infiltration Formulas based on Model Fitting on Richards EquationJournal of Hydrologic Engineering, 2002
- Knowledge‐Based System for SWMM Runoff Component CalibrationJournal of Water Resources Planning and Management, 1991
- An Approach Toward a Physical Interpretation of Infiltration‐CapacitySoil Science Society of America Journal, 1941