CURRENT METHODS FOR MINIMIZING SCANDIUM IN HIGH-STRENGTH Al–Mg ALLOYS
Open Access
- 17 March 2026
- journal article
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Casting Processes
- Vol. 163 (1) , 3-11
Abstract
The article presents a comprehensive review of modern approaches to solving the problem of reducing the content of the scandium deficient modifier in high-strength aluminum alloys of the Al–Mg system using the example of the deformable alloys 1570 or 1545. Scandium is one of the most effective microalloying elements, which ensures the formation of coherent dispersed particles of Al3Sc, which contribute to grain refinement, suppression of recrystallization and a significant increase in the mechanical properties of high-strength aluminum alloys. At the same time, the high cost of scandium limits its wide industrial application, which makes it urgent to find solutions for its, at least, partial replacement, without a noticeable loss of advantages from its addition. Based on the analysis of modern literary sources, the possibilities of partial or complete replacement of scandium due to microalloying with rare-earth and transition metals, in particular yttrium, erbium, lanthanum, as well as zirconium and indium, are considered. It is shown that yttrium and erbium, like scandium, are capable of forming coherent intermetallic phases with the L12 structure, which provide dispersion strengthening and stabilization of the microstructure. Particular attention is paid to the role of zirconium, which in combination with scandium forms thermally stable Al3(Sc,Zr) particles, which allows to significantly reduce the Sc content without significant loss of strength characteristics. The prospects of complex alloying of Sc–Y–Zr systems as an effective approach to optimizing the ratio of mechanical properties and cost of the Al-Mg alloy are substantiated. It is shown that reducing the scandium content while maintaining high strength, ductility and thermal stability opens up wide opportunities for the application of such alloys in the aviation, shipbuilding and transport industries. У статті представлено комплексний огляд сучасних підходів до вирішення проблеми зниження вмісту скандію в алюмінієвих сплавах системи Al–Mg із вмістом магнію 4,5 –6,5 мас. %. Скандій є одним із найбільш ефективних мікролегуючих елементів, який забезпечує формування когерентних дисперсних частинок Al3Sc, що сприяють подрібненню зерна, пригніченню рекристалізації та суттєвому підвищенню механічних властивостей алюмінієвих сплавів. Водночас висока вартість скандію обмежує його широке промислове застосування, що зумовлює актуальність пошуку рішень для його принаймні часткової заміни без помітної втрати переваг від його додавання. На основі аналізу сучасних літературних джерел розглянуто можливості часткової або повної заміни скандію за рахунок мікролегування рідкісноземельними та перехідними металами (РЗМ та ПМ) цирконієм, ітрієм, ербієм, лантаном та індієм. Показано, що ітрій та ербій, як і скандій, здатні утворювати когерентні інтерметалідні фази зі структурою L12, які забезпечують дисперсійне зміцнення та стабілізацію мікроструктури. Особливу увагу приділено ролі цирконію, який у поєднанні зі скандієм формує термічно стабільні частки Al3(Sc,Zr), що дозволяє суттєво зменшити вміст Sc без суттєвої втрати характеристик міцності.Обґрунтовано перспективність комплексного легування систем Sc–Y–Zr як ефективного підходу до оптимізації співвідношення механічних властивостей і вартості сплавів Al–Mg. Показано, що зниження вмісту скандію при збереженні високої міцності, пластичності і термічної стабільності відкриває широкі можливості для застосування таких сплавів в авіаційній, суднобудівній і транспортній галузях.Keywords
This publication has 28 references indexed in Scilit:
- AlMgScZr alloys for laser powder bed fusion additive manufacturing. A reviewMaterials & Design, 2025
- Improved intergranular corrosion resistance of Al-Mg-Mn alloys with Sc and Zr additionsMicron, 2022
- Effect of rare earth Y and Al–Ti–B master alloy on the microstructure and mechanical properties of 6063 aluminum alloyJournal of Alloys and Compounds, 2020
- Effect mechanisms of micro-alloying element La on microstructure and mechanical properties of hypoeutectic Al-Si alloysJournal of Materials Science & Technology, 2020
- Effects of large amounts of Mg (5–13 wt%) on hot compressive deformation behavior and processing maps of Al-Mg alloysJournal of Alloys and Compounds, 2019
- Science and technology in high-entropy alloysScience China Materials, 2018
- Influence of rare earth (Ce and La) addition on the performance of Al-3.0 wt%Mg alloyJournal of Wuhan University of Technology-Mater. Sci. Ed., 2017
- The effect of scandium addition on microstructure and mechanical properties of Al–Si–Mg alloy: A multi-refinement modifierMaterials Characterization, 2015
- Effect of Zr addition on properties of Al–Mg–Si aluminum alloy used for all aluminum alloy conductorMaterials & Design (1980-2015), 2011
- A study of coarsening, recrystallization, and morphology of microstructure in Al-Sc-(Zr)-(Mg) alloysMetallurgical and Materials Transactions A, 2004