RESEARCH OF METHODS AND ALGORITHMS FOR AUTOMATIC DETECTION OF THE PRESENCE OF COMBUSTION OF THE FUEL-AIR MIXTURE IN THE AFTERBURNER COMBUSTION CHAMBER OF GAS TURBINE ENGINES
Open Access
- 1 January 2024
- journal article
- Published by Zaporizhzhia National University in Computer Science and Applied Mathematics
- No. 2,p. 31-38
Abstract
The article provides an overview of the existing systems and methods for detecting the presence of flame in the afterburner combustion chamber (ACC) of aircraft gas turbine engines. They are classified by the operating principle. A detailed description of the main properties and analysis of the features of each system are presented. The need to improve the currently known systems for detecting the presence of flame in the ACC is indicated in connection with the need to increase the accuracy and speed of detecting the combustion of the fuel-air mixture in the ACC in the entire altitude-speed range of gas turbine engine operation. The design features of the ACC, which are being developed by Ukrainian engine builders, are described, and it is explained why it is impossible to use known and traditional methods of determining the presence of flame for such ACC design. It is concluded that the existing methods for detecting the presence of flame have limitations in the possibility of application and a significant probability of erroneous responses, so there is a need to develop a new method and algorithms for reliable detection and control of the combustion of the fuel-air mixture in the ACC. The most promising direction of development of systems and methods for determining the presence of flame in the ACC is determined. This is the analysis of the state of the environment in the ACC using microprocessor technology, using such flame properties as electrical conductivity due to the presence of ions and radicals, and the presence of conductivity pulsations in certain frequency spectra due to the occurrence of oxidation-reduction reactions. The main tasks of the algorithm for analyzing the state of the environment in the ACC based on the parameters of the ionization current between the ionization probes (housing and signal) installed in the ACC are described. A structural diagram of a new microcontroller system for determining and monitoring combustion of the fuel-air mixture in the ACC is proposed. The microcontroller system adjusts the gain factor of the signal from the ionization probes based on the ionization current valueисследование, analyzes the signal spectrum by frequency, and, based on the data received, generates a signal about the presence or absence of combustion of the fuel-air mixture in the ACC. У статті наведено огляд існуючих систем і методів визначення наявності полум’я у форсажній камері згоряння (ФКЗ) авіаційних газотурбінних двигунів. Дана їх класифікація за принципом дії. Надано розгорнутий опис основних властивостей та аналіз особливостей кожної системи. Зазначена необхідність удосконалення відомих на даний час систем визначення наявності полум’я в ФКЗ у зв’язку з потребою в підвищенні точності та швидкодії виявлення горіння паливо-повітряної суміші у форсажній камері згоряння у всьому висотно-швидкісному діапазоні експлуатації газотурбінного двигуна. Описані особливості конструкції ФКЗ, що розроблюють українські двигунобудівники, та пояснено, чому неможливо використовувати відомі та традиційні методи визначення наявності полум’я для такої конструкції ФКЗ. Зроблено висновок, що існуючі способи визначення наявності полум’я мають обмеження по можливості застосування та значну ймовірність помилкових спрацювань, тому існує необхідність у розробці нового методу та алгоритмів для надійного визначення та контролю горіння паливо-повітряної суміші у ФКЗ. Визначений найбільш перспективний напрям розвитку систем і методів визначення наявності полум’я в ФКЗ – аналіз стану середовища у ФКЗ за допомогою мікропроцесорної техніки, використовуючи такі властивості полум’я, як електропровідність, за рахунок наявності іонів та радикалів, та наявність пульсацій провідності у певних спектрах частот за рахунок протікання окисно-відновних реакцій. Описані основні задачі алгоритму з аналізу стану середовища в ФКЗ за параметрами іонізаційного струму між іонізаційними зондами (корпусним та сигнальним), встановленими в ФКЗ. Запропоновано структурну схему нової мікроконтролерної системи виявлення та контролю горіння паливо-повітряної суміші у ФКЗ. Мікроконтролерна система за величиною іонізаційного струму корегує коефіцієнт підсилення сигналу від іонізаційних зондів, аналізує спектр сигналу по частоті та за отриманими даними...Keywords
This publication has 17 references indexed in Scilit:
- Experimental study on combustion and flow resistance characteristics of an afterburner with air-cooled bluff-body flameholderAerospace Science and Technology, 2022
- Dynamic Flame Stability Diagnosis of Inverse Jet Flame using CH* ChemiluminescenceFuel, 2021
- Electrostatic sensors – Their principles and applicationsMeasurement, 2021
- Lean blowout detection for bluff-body stabilized flameFuel, 2020
- Study on ignition and flame development in gasoline partially premixed combustion using multiple optical diagnosticsCombustion and Flame, 2017
- Ion current sensing-based lean blowout detection for a pulse combustorCombustion and Flame, 2017
- Simultaneous time-resolved fluctuating temperature and acoustic pressure field measurements in a premixed swirl flameApplied Energy, 2014
- Diagnostic techniques for the monitoring and control of practical flamesProgress in Energy and Combustion Science, 2010
- An expert system concept for diagnosis and monitoring of gas turbine combustion chambersApplied Thermal Engineering, 2006
- Combustion control and sensors: a reviewProgress in Energy and Combustion Science, 2002