Design Method of Core-Separated Assembled Buckling Restrained Braces Confined by Two Lightweight Concrete-Infilled Tubes
Open Access
- 28 March 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (7) , 4306
Abstract
This paper introduces a novel type of buckling restrained braces (BRBs) called core-separated assembled BRBs (CSA-BRBs). These braces are comprised of two single BRBs that are confined by lightweight concrete-infilled tubes, which are longitudinally connected by two continuous webs. The CSA-BRBs utilize materials more efficiently by increasing the height of the webs to create a large inner cavity, leading to an economical design. This paper predicts the threshold of the restraint ratio of CSA-BRBs approximately. This is achieved by assuming that the maximum moment resulting from applied loads at mid-height is less than the moment-bearing resistance that is conducted according to the outermost fiber of the external restraining section reading yielding. Elastic-plastic numerical analysis is conducted using FEM with beam elements for CSA-BRBs that are subjected to both monotonic and cyclic axial loads. The load resistance, hysteretic performance, and failure mechanism of CSA-BRBs are investigated by varying their restraining ratios. It is recommended that the restraint ratio threshold of CSA-BRBs under monotonic axial compression is used as a bearing type and the restraint ratio threshold of CSA-BRBs under axially compressive-tensile cyclic loads as an energy-dissipation type. This method provides a complete design for CSA-BRBs.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (FRF-TP-20-033A1)
This publication has 18 references indexed in Scilit:
- Numerical studies of cyclic behavior and design suggestions on triple-truss-confined buckling-restrained bracesEngineering Structures, 2017
- Theoretical and experimental investigation of core-separated buckling-restrained bracesJournal of Constructional Steel Research, 2017
- Development of a novel high-performance all-steel fish-bone shaped buckling-restrained braceEngineering Structures, 2017
- Numerical and experimental studies of corrugated-web-connected buckling-restrained bracesEngineering Structures, 2017
- Cyclic tests of all-steel web-restrained buckling-restrained brace subassemblagesJournal of Constructional Steel Research, 2016
- Numerical investigation of seismic behavior of short-core all-steel buckling restrained bracesJournal of Constructional Steel Research, 2015
- Critical load and application of core-separated buckling-restrained bracesJournal of Constructional Steel Research, 2015
- Local buckling behavior of steel angle core members in buckling-restrained braces: Cyclic tests, theoretical analysis, and design recommendationsEngineering Structures, 2014
- Experimental and constitutive model study of structural steel under cyclic loadingJournal of Constructional Steel Research, 2011
- A novel type of angle steel buckling‐restrained brace: Cyclic behavior and failure mechanismEarthquake Engineering & Structural Dynamics, 2010