Tuning the pin configuration on cold plate for better thermal management of lithium-ion battery
- 7 August 2023
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 239 (3) , 1266-1280
Abstract
Enhancing cooling performance with the lowest pressure drop characteristics is a persistent problem in battery thermal management systems. The present investigation discusses the design of cooling plate pin configuration, especially for the fast charging–discharging operation of lithium-ion batteries. At first, the effect of pin geometrical configurations, viz. triangular, square, circular and elliptical, are studied for thermohydraulic characteristics. Further, orientation of the pin is investigated for normal and thermal runaway conditions. Furthermore, the effect of discharge rate and flow direction on thermal runaway behavior is also analyzed. Our results reveal that introducing pin on the cooling plate is desirable for better battery thermal management and keeping the battery surface temperature within safety guidelines. Further, the elliptical pin on the cooling plate is found to result in the least pressure drop (+80.46%) among pin configurations considered. The temperature of battery surface is found to be minimum when the pins are oriented at an angle of 90° to a flow direction of 180°, which is recommended particularly for the operation of the battery under thermal runaway. Furthermore, the pin configuration maintained cell surface temperature below 22°C and 75°C during normal and thermal runaway conditions, respectively. Moreover, the maximum pressure drop is found to be 225 and 136 kPa during normal and thermal runaway conditions, respectively.Keywords
This publication has 44 references indexed in Scilit:
- Characterization of penetration induced thermal runaway propagation process within a large format lithium ion battery moduleJournal of Power Sources, 2015
- Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetryJournal of Power Sources, 2014
- Effects of pin fin shape and configuration on the single-phase heat transfer characteristics of jet impingement on micro pin finsInternational Journal of Heat and Mass Transfer, 2014
- Research on the heat dissipation performance of battery pack based on forced air coolingJournal of Power Sources, 2013
- Investigation of Short-Circuit Scenarios in a Lithium-Ion Battery CellJournal of the Electrochemical Society, 2012
- Design optimization of electric vehicle battery cooling plates for thermal performanceJournal of Power Sources, 2011
- Review of the shear-stress transport turbulence model experience from an industrial perspectiveInternational Journal of Computational Fluid Dynamics, 2009
- Forced convective heat transfer across a pin fin micro heat sinkInternational Journal of Heat and Mass Transfer, 2005
- Modeling thermal management of lithium-ion PNGV batteriesJournal of Power Sources, 2002
- Heat-Transfer Coefficients for Staggered Arrays of Short Pin FinsJournal of Engineering for Power, 1982