Characterisation of fused deposition modeling 3D printers for pharmaceutical and medical applications
Authors:
- 23 July 2018
- journal article
- research article
- Published by Taylor & Francis in Pharmaceutical Development and Technology
- Vol. 23 (10) , 1136-1145
Abstract
Fused deposition modeling (FDM) is a promising 3D printing technique for the fabrication of personalized drug dosage forms and patient-specific implants. However, there are no market products produced by FDM available at this time. One of the reasons is the lack of a consistent and harmonized approval procedure. In this study, three FDM printers have been characterised with respect to printing parameters relevant for pharmaceutical and medical applications, namely the positioning, hot-end temperature, material residence time, printing velocity and volumetric material flow. The printers are the Ultimaker 2 (UM2), the PRotos v3 (PR3) as well as an in-house developed printer (IDP). The positioning results showed discrepancies between the printers, which are mainly based on different types of drive systems. Due to comparable utilised hot-ends and nozzle geometries, the results for the temperature and residence time distribution measurements were quite similar. The IDP has a high positioning accuracy but is limited with respect to printing velocity, while the achievable material volume flows were different for all printers. The presented characterisation method aims to contribute to the development of a harmonized equipment qualification framework for FDM printers, which could lead to an acceleration and facilitation of an approval procedure for 3D printed products.Keywords
This publication has 31 references indexed in Scilit:
- Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printingEuropean Journal of Pharmaceutical Sciences, 2015
- Fused-filament 3D printing (3DP) for fabrication of tabletsInternational Journal of Pharmaceutics, 2014
- A review of melt extrusion additive manufacturing processes: I. Process design and modelingRapid Prototyping Journal, 2014
- Rapid tooling using 3D printing system for manufacturing of customized tracheal stentRapid Prototyping Journal, 2014
- Towards fabrication of 3D printed medical devices to prevent biofilm formationInternational Journal of Pharmaceutics, 2014
- Three-dimensional drug printing: A structured reviewJournal of the American Pharmacists Association, 2013
- Fused deposition modeling of patient‐specific polymethylmethacrylate implantsRapid Prototyping Journal, 2010
- Effect of processing conditions on the bonding quality of FDM polymer filamentsRapid Prototyping Journal, 2008
- Application of fused deposition modelling in controlled drug delivery devicesAssembly Automation, 2007
- Multimechanism oral dosage forms fabricated by three dimensional printing™Journal of Controlled Release, 2000