Edge effect modeling and experiments on active lap processing
Authors:
Open Access
- 28 April 2014
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 22 (9) , 10761-10774
Abstract
Edge effect is regarded as one of the most difficult technical issues for fabricating large primary mirrors, especially for large polishing tools. Computer controlled active lap (CCAL) uses a large size pad (e.g., 1/3 to 1/5 workpiece diameters) to grind and polish the primary mirror. Edge effect also exists in the CCAL process in our previous fabrication. In this paper the material removal rules when edge effects happen (i.e. edge tool influence functions (TIFs)) are obtained through experiments, which are carried out on a Φ1090-mm circular flat mirror with a 375-mm-diameter lap. Two methods are proposed to model the edge TIFs for CCAL. One is adopting the pressure distribution which is calculated based on the finite element analysis method. The other is building up a parametric equivalent pressure model to fit the removed material curve directly. Experimental results show that these two methods both effectively model the edge TIF of CCAL.Keywords
Funding Information
- National Natural Science Foundation of China (NSFC) (61178043)
This publication has 14 references indexed in Scilit:
- E-ELT optomechanics: overview2012
- Edges in CNC polishing: from mirror-segments towards semiconductors, paper 1: edges on processing the global surfaceOptics Express, 2012
- Research on reducing the edge effect in magnetorheological finishing.Applied Optics, 2011
- Pressure distribution model in edge effect2009
- Parametric modeling of edge effects for polishing tool influence functionsOptics Express, 2009
- Status of the James Webb Space Telescope (JWST)2008
- The Giant Magellan Telescope (GMT)2008
- Edge effects with the Preston equation for a circular tool and workpieceApplied Optics, 2004
- Edge effects with Preston equation2003
- Computer-Controlled Optical Surfacing With Orbital Tool MotionOptical Engineering, 1986