Additive Manufacturing With Conductive, Viscoelastic Polymer Composites: Direct-Ink-Writing of Electrolytic and Anodic Poly(Ethylene Oxide) Composites
- 13 September 2017
- journal article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 139 (11) , 111004
Abstract
Conductive viscoelastic polymer composites (CVPCs) consisting of conductive fillers in viscoelastic polymer matrices find numerous applications in emerging technologies such as flexible electronics, energy storage, and biochemical sensing. Additive manufacturing methods at micro- and mesoscales provide exciting opportunities toward realizing the unique capabilities of such material systems. In this paper, we study the direct-ink-writing (DIW) process of CVPCs consisting of electrically conductive additives in a poly(ethylene oxide) (PEO) matrix. We particularly focus on the deposition mechanisms of the DIW process and the influence of these mechanisms on the printed structure geometry, morphology, and functional properties. To this end, we utilized a novel practical approach of modeling the ink extrusion through the nozzles considering the non-Newtonian viscous effects while capturing the viscoelastic extensional flow (drawing) effects through the variation of the nozzle exit pressure. We concluded that inks containing higher amounts of high molecular weight (HMW) PEO exhibit drawing type deposition at high printing speeds and low inlet pressures enabling thinner, higher aspect ratio structures with ideal three-dimensional stacking. Under this deposition mechanism, the electrical conductivity of the anodic structures decreased with increasing printing speed, indicating the effect of the drawing mechanism on the printed structure morphology.Keywords
This publication has 41 references indexed in Scilit:
- 3D Printing of Interdigitated Li‐Ion Microbattery ArchitecturesAdvanced Materials, 2013
- Bio-ink properties and printability for extrusion printing living cellsBiomaterials Science, 2013
- Micro-extrusion of organic inks for direct-write assemblyJournal of Micromechanics and Microengineering, 2008
- Direct Ink Writing of 3D Functional MaterialsAdvanced Functional Materials, 2006
- Characterization of micromanipulator-controlled dry spinning of micro- and sub-microscale polymer fibersJournal of Micromechanics and Microengineering, 2006
- Effects of Fluid Properties on Dispensing Processes for Electronics PackagingIEEE Transactions on Electronics Packaging Manufacturing, 2006
- Direct Drawing of Suspended Filamentary Micro- and Nanostructures from Liquid PolymersNano Letters, 2004
- Direct writing in three dimensionsMaterials Today, 2004
- A House of Cards Structure in Polypropylene/Clay Nanocomposites under Elongational FlowNano Letters, 2001
- Use of the pendant drop method to measure interfacial tension between molten polymersMaterials Research, 1999