Effect of process parameters on stress and strain of hybrid deposition and micro-rolling
- 27 September 2021
- journal article
- research article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 28 (3) , 490-504
Abstract
Purpose: This paper aims to summarize the influence law of hybrid deposited and micro-rolling (HDMR) technology on the shaping strain and residual stress. And the rolling parameters combination was further optimized to guide the actual production. Design/methodology/approach: This paper proposed a three-dimensional coupled thermo-mechanical model of the HDMR process. The validated model is used to investigate the influences of rolling parameters on stress and plastic strain (the distance between the energy source and roller [De–r], the rolling compression [cr] and the friction coefficient [fr]). The orthogonal optimization of three factors and three levels was carried out. The influence of rolling parameters on the plastic strain and residual stress is analyzed. Findings: The simulation results show that HDMR technology can effectively increase the shaping strain of the weld bead and reduce the residual tensile stress on the weld bead surface. Furthermore, the influence of rolling parameters on stress and strain is obtained by orthogonal analysis, and the corresponding optimal combination is proposed. Also, the rolling temperature significantly affects the residual stress, and the rolling reduction has a substantial effect on the plastic deformation. Research limitations/implications: Owing to the choice of research methods, this paper failed to study microstructure evolution. Originality/value: This paper provides a reference principle for the optimal selection of rolling parameters in HDMR.Keywords
This publication has 20 references indexed in Scilit:
- Effect of grooved roll profiles on microstructure evolutions of AZ31 sheets in Periodical Straining Rolling processMaterials Science and Engineering: A, 2014
- Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rollingJournal of Materials Processing Technology, 2013
- Experimental Study on Residual Stress in Titanium Alloy Laser Additive ManufacturingApplied Mechanics and Materials, 2013
- Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rollingRapid Prototyping Journal, 2013
- Three-dimensional finite element analysis of thermal stress in single-pass multi-layer weld-based rapid prototypingJournal of Materials Processing Technology, 2012
- Numerical Simulation of Hot Forging for the Disc of Superalloy GH4169Advanced Materials Research, 2011
- Numerical simulation of multi-pass rolling force and temperature field of plate steel during hot rollingJournal of Shanghai Jiaotong University (Science), 2011
- Dynamic Impact Response of Inconel 718 Alloy under Low and High TemperaturesMATERIALS TRANSACTIONS, 2011
- Numerical simulation to study the effect of tack welds and root gap on welding deformations and residual stresses of a pipe-flange jointInternational Journal of Pressure Vessels and Piping, 2005
- A new finite element model for welding heat sourcesMetallurgical Transactions B, 1984