Heat Transfer Characteristics of Methane–Air-Premixed Jet Flames With Flat/Hemispherical Walls
- 23 December 2024
- journal article
- research article
- Published by Wiley in Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy
- Vol. 1 (2) , 1-28
Abstract
The in-depth study of the mutual coupling between the flame and the wall can significantly enhance the efficiency of actual combustion devices. A two-dimensional numerical model was established for the heat transfer characteristics of methane–air-premixed jet flames on flat and hemispherical walls, respectively. An examination of the effects of wall shape on the heat transfer characteristics of methane/air flames was conducted as a function of the equivalence ratio (ϕ = 0.9–1.5), the mixture Reynolds number (Re = 300–800), and the burner-to-plate distance (H/d = 1–6). As the equivalence ratio and Reynolds number increase, the flame temperature increases on the surface near the wall, and the temperature near the flame centerline is higher under the influence of a hemispherical wall than it is under the influence of a plate. In addition, the wall's heat flux increases as both the equivalence ratio and the Reynolds number increase. It is observed that the heat flux of the hemispherical wall is greater than that of the flat plate near the stagnation point, whereas it is smaller at a distance from the stagnation point. Due to the burner-to-plate distance, thermal efficiency is maximized when the flame-premixed cone contacts the impact surface, which is the desired condition for optimal performance. Due to different operating conditions, the efficiency of heat transfer is always higher under the action of a flat plate than under the action of a hemispherical wall.Keywords
This publication has 40 references indexed in Scilit:
- Influence of Flow Configuration and Thermal Wall Boundary Conditions on Turbulence During Premixed Flame-Wall Interaction within Low Reynolds Number Boundary LayersFlow, Turbulence and Combustion, 2023
- Numerical investigation of the heat transfer characteristics of propane/air flames impinging on a cylindrical surfaceApplied Thermal Engineering, 2022
- Heat transfer characterisation of impinging flame jet over a wedgeApplied Thermal Engineering, 2021
- Hydrothermal, energy and emissions characteristics assessment of impinging flame jet on an oval flat tubeJournal of Thermal Analysis and Calorimetry, 2021
- Impinging premixed methane-air flame jet of tube burner: thermal performance analysis for varied equivalence ratiosHeat and Mass Transfer, 2018
- Experimental investigation on temperature field and heat transfer distribution of a slot burner methane/air flame impinging on a curved surfaceApplied Thermal Engineering, 2018
- Aircraft engines’ needs from combustion science and engineeringCombustion and Flame, 2012
- Some aspects of thermal load and operating indexes after downsizing for internal combustion engineJournal of Thermal Analysis and Calorimetry, 2011
- Life prediction of thermally highly loaded components: modelling the damage process of a rocket combustion chamber hot wallCEAS Space Journal, 2011
- A criterion based on computational singular perturbation for the identification of quasi steady state species: A reduced mechanism for methane oxidation with NO chemistryCombustion and Flame, 2008