Scaling Orchestration in Physical Model Test of Oscillating Buoy Wave Energy Converter
Open Access
- 26 February 2021
- journal article
- review article
- Published by Frontiers Media SA in Frontiers in Marine Science
- Vol. 8
Abstract
The physical model test interlinks the concept design and sea trial during the commercial utilization of wave energy converter. Aiming at the oscillating buoy wave energy converter, the energy conversion principle is firstly decomposed. Then, the model scale requirement of fluid motion and corresponding hydrodynamic similarity criterion considered in the physical model test are introduced. Finally, the solution of scaling orchestration problem is proposed considering the overall model scale in different energy conversion processes. The hydrodynamic similarity criterion is selected based on the working mechanism of the energy-capturing body only in contact with water, and the model scale requirements during the other stages of energy conversion structure are determined by the main mechanical factors. The first-stage energy conversion of device is recommended to meet the Froude similarity requirements, while the second-stage and third-stage energy conversions only need to meet the power similarity requirements. The power scale ratio in the three energy conversions is recommended to be consistent with the Froude similarity, and there are no requirements of geometric shape of second-stage and third-stage energy conversions to meet the similarity criteria.Keywords
This publication has 47 references indexed in Scilit:
- Assessment of Wave Energy Extraction From Seas: Numerical ValidationJournal of Energy Resources Technology, 2012
- Design, Construction and Testing of a Hydraulic Power Take-Off for Wave Energy ConvertersEnergies, 2012
- Scale effects in physical hydraulic engineering modelsJournal of Hydraulic Research, 2011
- Wave energy utilization: A review of the technologiesRenewable and Sustainable Energy Reviews, 2010
- The impact of wave energy farms in the shoreline wave climate: Portuguese pilot zone case study using Pelamis energy wave devicesRenewable Energy, 2010
- A review of wave energy converter technologyProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2009
- A wave-to-wire model of the SEAREV wave energy converterProceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 2007
- An electronic load for testing photovoltaic panelsJournal of Power Sources, 2006
- Wave energy in Europe: current status and perspectivesRenewable and Sustainable Energy Reviews, 2002
- Physical modelling and similitude of marine structuresOcean Engineering, 1998