100 nm gate hole openings for low voltage driving field emission display applications
Authors:
- 1 May 2001
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 19 (3) , 900-903
Abstract
A laser interference lithography (LIL) process has been developed for 100 nm gate hole openings of a Spindt-tip field emission cathode. A precursor structure of 200-nm-high and 100-nm-wide resist dots is made at every 200 nm square-grid center over a whole surface area of a substrate by using the LIL. The precursor is transferred to uniform arrays of chromium (Cr) gate holes by using a trilayer resist process. For pixellation of emitter tips, oxide via holes are formed through selected areas of the gate metal holes to prepare a real estate which is to be occupied by molybdenum (Mo) tip emitters. Emission current densities of 0.01 and have been obtained at gate bias voltages of 10 and 20 V, respectively, from the emitters with a packing density of These results suggest that cheaper and lower voltage driving electronics can be used for field emission displays by scaling the gate hole openings down to 100 nm. Manufacturing issues related to the trilayer resist process for the gate hole openings, parting layer deposition, and Mo-tip formation are discussed.
Keywords
This publication has 12 references indexed in Scilit:
- L‐5: Late‐New Paper : ThinCRT™ Low Voltage Emitter Structure Allows Use of Low Voltage CMOS Display DriversSID Symposium Digest of Technical Papers, 2000
- Methods for fabricating arrays of holes using interference lithographyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1997
- Use of interference lithography to pattern arrays of submicron resist structures for field emission flat panel displaysJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1997
- Microtips and resistive sheet: A theoretical description of the emissive properties of this systemJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1997
- Interferometric lithography of sub-micrometer sparse hole arrays for field-emission display applicationsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996
- Benefits of the lateral resistor in a field effect displayJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996
- Optically matched trilevel resist process for nanostructure fabricationJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1995
- Field emitter array mask patterning using laser interference lithographyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1995
- Experimental study of field emission properties of the Spindt-type field emitterJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1995
- Arrays of gated field-emitter cones having 0.32 μm tip-to-tip spacingJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1994