Internal stress distribution monitoring for prestressed anchor cables and laboratory test
Authors:
- 1 January 2026
- journal article
- research article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 63, 1-11
Abstract
This paper proposes an internal stress monitoring structure and stress distribution monitoring method for prestressed anchor cables, validated through experiments at three scales. Tensile breaking tests of a single monitoring structure confirmed its strength exceeds that of the steel strand, with consistent deformation up to the yield load, meeting basic requirements for axial force monitoring. Dual-structure repeated tensioning tests at various stress levels showed consistent deformation. After 10 cycles of 220 kN tensioning, processing stresses and residual strains were eliminated, enhancing accuracy. A linear calculation formula between monitored strain and axial force is established using data from 40 post-elimination cycles. A 9 m graded tensioning test with eight monitored structures under simulated conditions revealed gradual stabilization of prestress attenuation (≈6%) along the cable length as load increased. The monitoring structure accurately captured stable force measurements reflecting characteristic changes. These results validate the rationality and feasibility of the proposed structure and method for practical applications.Keywords
Funding Information
- State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin (GE0199A082021)
- State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin (SKL2024YJTS15)
- National Key Research and Development Program of China (2024YFF1307804)
This publication has 22 references indexed in Scilit:
- Assessing stability of 3D slopes reinforced with prestressed anchor cables considering strength reserveComputers and Geotechnics, 2024
- Service life prediction of prestressed anchor cable exposed to a dry-wet cycling corrosion environmentConstruction and Building Materials, 2023
- Automatic modal identification of bridges based on free vibration response and variational mode decomposition techniqueEngineering Structures, 2023
- Monitoring tunneling induced ground displacements using distributed fiber-optic sensingTunnelling and Underground Space Technology, 2014
- Guided ultrasonic waves for non-destructive monitoring of the stress levels in prestressed steel strandsUltrasonics, 2009
- Detection and evaluation of failures in high-strength tendon of prestressed concrete bridges by acoustic emissionConstruction and Building Materials, 2007
- A review of the acoustic-emission monitoring of wire ropeOcean Engineering, 1997
- Rock reinforcement systemsInternational Journal of Rock Mechanics and Mining Sciences, 1997
- Laboratory evaluation of cement-based grouts and grouted rock anchorsInternational Journal of Rock Mechanics and Mining Sciences, 1995
- The shear strength of reinforced rock jointsInternational Journal of Rock Mechanics and Mining Sciences, 1995