Relaminarization of Pipe Flow by Means of 3D-Printed Shaped Honeycombs
- 8 May 2019
- journal article
- research article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 141 (11)
Abstract
Based on a novel control scheme, where a steady modification of the streamwise velocity profile leads to complete relaminarization of initially fully turbulent pipe flow, we investigate the applicability and usefulness of custom-shaped honeycombs for such control. The custom-shaped honeycombs are used as stationary flow management devices which generate specific modifications of the streamwise velocity profile. Stereoscopic particle image velocimetry and pressure drop measurements are used to investigate and capture the development of the relaminarizing flow downstream these devices. We compare the performance of straight (constant length across the radius of the pipe) honeycombs with custom-shaped ones (variable length across the radius) and try to determine the optimal shape for maximal relaminarization at minimal pressure loss. The optimally modified streamwise velocity profile is found to be M-shaped, and the maximum attainable Reynolds number for total relaminarization is found to be of the order of 10,000. Consequently, the respective reduction in skin friction downstream of the device is almost by a factor of 5. The break-even point, where the additional pressure drop caused by the device is balanced by the savings due to relaminarization and a net gain is obtained, corresponds to a downstream stretch of distances as low as approximately 100 pipe diameters of laminar flow.Keywords
All Related Versions
This publication has 40 references indexed in Scilit:
- Relaminarising pipe flow by wall movementJournal of Fluid Mechanics, 2019
- Stabilisation and drag reduction of pipe flows by flattening the base profileJournal of Fluid Mechanics, 2019
- Exceeding the Asymptotic Limit of Polymer Drag ReductionPhysical Review Letters, 2018
- Relaminarization by Steady Modification of the Streamwise Velocity Profile in a PipeFlow, Turbulence and Combustion, 2018
- Destabilizing turbulence in pipe flowNature Physics, 2018
- Drag reduction properties of superhydrophobic mesh pipesSurface Topography: Metrology and Properties, 2017
- Turbulent Drag Reduction by Biopolymers in Large Scale PipesJournal of Fluids Engineering, 2015
- Drag reduction by ribletsPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2011
- Slip on Superhydrophobic SurfacesAnnual Review of Fluid Mechanics, 2010
- Mechanics and Prediction of Turbulent Drag Reduction with Polymer AdditivesAnnual Review of Fluid Mechanics, 2008