Evaluation of Mechanical and Thermal Properties of Jute and Ramie Reinforced Epoxy-based Hybrid Composites
- 12 August 2021
- journal article
- research article
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 19 (14) , 8022-8032
Abstract
In this study, the hybrid composites were prepared from ramie and jute natural as reinforcement, an epoxy polymer as a matrix, and SiC and cellulose as fillers via hand layup process. Mechanical and thermogravimetric analysis was carried out to quantify the effect of reinforcement on hybrid composites and evaluate their mechanical properties and thermal stability. The mechanical tests showed improvement in tensile and flexural strength of the hybrid composites with increasing content of bidirectional woven ramie fiber, and decreased with increased content of chopped jute fiber. The Izod impact test results revealed that chopped jute fiber form could resist more impact load when compared with woven ramie mat fibers. Hence, the impact energy increased with the increased content of chopped jute fiber in the hybrid composites. The surface morphological analysis of hybrid composites revealed the fiber pullout, cracks, and other failure modes of the hybrid composite using SEM analysis.Keywords
This publication has 32 references indexed in Scilit:
- Long-term tensile properties of natural fibre-reinforced polymer composites: Comparison of flax and glass fibresComposites Part B: Engineering, 2016
- Functionalized graphite nanoplatelets/epoxy resin nanocomposites with high thermal conductivityInternational Journal of Heat and Mass Transfer, 2016
- A Review on Natural Fiber Reinforced Polymer Composite and Its ApplicationsInternational Journal of Polymer Science, 2015
- Mechanical properties of kenaf fibre reinforced polymer composite: A reviewConstruction and Building Materials, 2015
- Review: Raw Natural Fiber–Based Polymer CompositesInternational Journal of Polymer Analysis and Characterization, 2014
- Evaluation of mechanical properties of abaca–jute–glass fibre reinforced epoxy compositeMaterials & Design (1980-2015), 2013
- Effect of surface treatments on interfacial properties of flax fiber-reinforced compositesAdvanced Composite Materials, 2013
- Thermal and mechanical properties of waste grass broom fiber-reinforced polyester compositesMaterials & Design (1980-2015), 2012
- Lignin-based carbon fibers for composite fiber applicationsCarbon, 2002
- Thermal Analysis of Lignocellulosic MaterialsJournal of Macromolecular Science, Part C: Polymer Reviews, 1981