Strut-and-Tie Method for GFRP-RC Deep Members
Authors:
Open Access
- 11 July 2024
- journal article
- research article
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 18 (1) , 1-16
Abstract
The current code provisions in ACI 440.11 are based on the flexural theory that applies to slender members and may not represent the actual structural behavior when the shear span-to-reinforcement depth ratio is less than 2.5 (i.e., deep members). The Strut-and-tie method (STM) can be a better approach to design deep members; however, this chapter is not included in the code. Research has shown that STM models used for steel-reinforced concrete (RC) give satisfactory results when applied to glass fiber-reinforced polymer-reinforced (GFRP)-RC members with a/d less than 2.5. Therefore, this study is carried out to provide insights into the use of STM for GFRP-RC deep members based on the available literature and to highlight the necessity for the inclusion of a new chapter addressing the use of STM in the ACI 440.11 Code. It includes a design example to show the implications of ACI 440.11 code provisions when applied to GFRP-RC deep members (i.e., isolated footings) and compares it when designed as per STM provided in ACI 318-19. It was observed that current code provisions in ACI 440.11 required more concrete thickness (i.e., h = 1.12 m) leading to implementation challenges. However, the required dimensions decreased (i.e., h = 0.91 m) when the design was carried out as per STM. Due to the novelty of GFRP reinforcement, current code provisions may limit its extensive use in RC buildings, particularly in footings given the water table issues and excavation costs. Therefore, it is necessary to adopt innovative methods such as STM to design GFRP-RC deep members if allowed by the code.Keywords
Funding Information
- National Science Foundation (1916342)
This publication has 10 references indexed in Scilit:
- A Recalibration of the Crack Width Bond-Dependent Coefficient for GFRP-Reinforced ConcreteJournal of Composites for Construction, 2019
- Load capacity predictions of continuous concrete deep beams reinforced with GFRP barsStructures, 2019
- Experimental tests of two-span continuous concrete deep beams reinforced with GFRP bars and strut-and-tie method evaluationComposite Structures, 2019
- Nonlinear finite-element analysis for the behavior prediction and strut efficiency factor of GFRP-reinforced concrete deep beamsEngineering Structures, 2017
- Strut Efficiency-Based Design for Concrete Deep Beams Reinforced with Fiber-Reinforced Polymer BarsACI Structural Journal, 2016
- Modeling of the strut-and-tie parameters of deep beams for shear strength predictionEngineering Structures, 2016
- Database of Shear Tests for Non-slender Reinforced Concrete Beams without StirrupsACI Structural Journal, 2014
- Evaluation of Existing Strut-and-Tie Methods and Recommended ImprovementsACI Structural Journal, 2014
- Derivation of strut-and-tie models for the 2002 ACI Code2002
- Toward a Consistent Design of Structural ConcretePCI Journal, 1987