Impressive Transmission Mode Electromagnetic Interference Shielding Parameters of Graphene-like Nanocarbon/Polyurethane Nanocomposites for Short Range Tracking Countermeasures
- 17 June 2015
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (27) , 14833-14842
Abstract
Shielding the microwave signature (8.2–12.4 GHz, X-band) of a locked in target is a tactically important electronic countermeasure. Herein, we report on mitigation in X-band transmission mode shielding parameters for polyurethane (PU), after incorporating graphene-like nanocarbon sheets (GNCs). Initially, PU and variable weight percent (1–25) GNCs/PU paste samples were subjected to Fourier transform infrared, Raman spectroscopy, and scanning electron microscopy. These samples were molded into toroidal shaped specimens by adiabatic hot-pressing technique, for microwave scattering measurements. Parameters, such as complex permittivity (ϵ′–jϵ″), alternating current (ac) conductivity, skin thickness, transmission (S21), effective transmission loss (SET), and shielding effectiveness were determined, in addition to direct current (dc) conductivity. The real and imaginary components are increased, respectively, by ∼5 and ∼30 times, whereas loss tangent, by ∼7, at 25 wt % loading of GNCs. The ac conductivity is enhanced from 0.248 (PU) to 7.288 S/m (25 wt %) by maximizing transmission loss to −26.45 dB (99.9%) and minimizing thickness to 1–2 mm. The dc percolation threshold is found to be low at ∼5 wt %, indicating superior dispersibility of GNCs, thereafter. In analysis, the atomic polarization (at ∼10 GHz) associated with the aromatic urethane amide rings acts as a backbone to engage incident electromagnetic field wiggles. The coupling occurs via charge transfer polarization currents at doubly bonded nitrogen, oxygen, and hydrosorpted sp3 carbon sites in GNCs. The field–matter interaction is dominant at the microvoid skin interface between GNCs and PU. Possible polarization mechanism is explained. The GNCs/PU nanocomposites are realized as an effective electromagnetic interference shielding block in the tracking band. The details are presented.Keywords
Funding Information
- Defence Research and Development Organization
This publication has 28 references indexed in Scilit:
- Lightweight and Flexible Graphene Foam Composites for High‐Performance Electromagnetic Interference ShieldingAdvanced Materials, 2013
- Microwave absorbing properties of a thermally reduced graphene oxide/nitrile butadiene rubber compositeCarbon, 2012
- Synthesis of polyaniline-gold/graphene oxide composite and microwave absorption characteristics of the composite filmsMaterials Letters, 2011
- Tough Graphene−Polymer Microcellular Foams for Electromagnetic Interference ShieldingACS Applied Materials & Interfaces, 2011
- Recent advances in graphene based polymer compositesProgress in Polymer Science, 2010
- Preparation of Conductive Nanotube–Polymer Composites Using Latex TechnologyAdvanced Materials, 2004
- Ultra-low electrical percolation threshold in carbon-nanotube-epoxy compositesPolymer, 2003
- Electrical properties of single wall carbon nanotube reinforced polyimide compositesComposites Science and Technology, 2003
- First Order Rigidity Transition in Random Rod NetworksPhysical Review Letters, 1995
- Electromagnetic wave absorbers and anechoic chambers through the yearsIEEE Transactions on Antennas and Propagation, 1973