An NDT Method for Measuring the Diameter and Embedment Depth of the Main Rebar in Cement Poles Based on Rotating Permanent Magnet Excitation
Open Access
Abstract
Cement poles serve as supporting components for transmission lines and are widely used in medium- and low-voltage transmission networks. The main rebar is the primary load-bearing structure of the pole, and the accurate measurement of its diameter and embedment depth is crucial for quality control and safety assessment. However, existing non-destructive testing methods lack the accuracy of quantifying the internal main rebar of cement poles, and the measurement process is complex, cumbersome, and inefficient. To address this issue, this paper proposes a magnetic rotation-based detection method for measuring the diameter and embedment depth of the main rebar within cement poles. A specially designed H-type magnetic excitation structure is proposed, coupled with a detection technique utilizing rotating permanent magnets. The magnetic induction intensity data were acquired at seven distinct rotation angles using sensors, and the collected data were subsequently combined with a CNN-LSTM model to invert the diameter and embedment depth of the main rebar. The experimental results indicate that the method significantly improved the measurement accuracy compared with the condition of fixed magnetic excitation, with reductions in root mean square error (RMSE) of 46.71% and 35.57% for the diameter and embedment depth measurements, respectively. This method provides a robust, efficient, and accurate solution for quantifying the main rebar within cement poles, addressing the challenge associated with the quality assessment and health monitoring of these structures.Keywords
This publication has 41 references indexed in Scilit:
- Evaluation of Ultrasonic SH-Waveform Tomography for Determining Cover Thickness and Rebar Size in Concrete StructuresJournal of Nondestructive Evaluation, 2022
- A review on corrosion detection and protection of existing reinforced concrete (RC) structuresConstruction and Building Materials, 2022
- Coupled application of innovative electromagnetic sensors and digital image correlation technique to monitor corrosion process of reinforced bars in concreteCement and Concrete Composites, 2020
- Characteristics of the steel-concrete interface and their effect on the corrosion of steel bars in concreteConstruction and Building Materials, 2020
- Cracking of cover concrete due to non-uniform corrosion of corner rebar: A 3D meso-scale studyConstruction and Building Materials, 2020
- Monitoring reinforcement corrosion and corrosion-induced cracking by X-ray microcomputed tomography methodCement and Concrete Research, 2017
- An innovative corrosion evaluation technique for reinforced concrete structures using magnetic sensorsConstruction and Building Materials, 2017
- Degradation model of bond performance between deteriorated concrete and corroded deformed steel barsConstruction and Building Materials, 2016
- Corrosion-induced concrete cracking model considering corrosion product-filled paste at the concrete/steel interfaceConstruction and Building Materials, 2016
- Darcy's law‐based model for wicking in paper‐like swelling porous mediaAIChE Journal, 2010