Stress-strain state of a reinforced stepped bimodular column
Open Access
- 1 November 2019
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 661 (1) , 012030
Abstract
The article discusses the reinforced stepped column under the action of forces applied along its axis. The column is clamped at the ends and made of a bimodular material, that is, a material having different elastic moduli in tension and compression. Formulas for normal stresses are obtained, depending on the mechanical characteristics of the column material, the geometrical values of the column, and the reinforcement bars. Numerical calculations were carried out for a column made of fibro-foam concrete, in which the elastic modulus of tensile strength is greater than the elastic modulus of compression. The influence of different modulus of the material on the stressed state of the column in the compressed and stretched parts was investigated. The graphs of the normal stresses as a function of the number of reinforcement bars of the stretched zone with a constant number of reinforcement bars in the compressed zone with and without bimodularity are given. It is shown that in some cases normal tensile stresses without bimodularity are 46% less than with bimodularity, and compressive normal stresses are 29% more than with bimodularity.Keywords
This publication has 9 references indexed in Scilit:
- Static analysis of a reinforced bimodulus beam on elastic foundationMATEC Web of Conferences, 2018
- Complex method of defects diagnostics in underground structuresMATEC Web of Conferences, 2018
- Non-destructive test of steel structures by conical indentationMATEC Web of Conferences, 2017
- Stress-strain state of reinforced bimodulus beam on an elastic foundationIOP Conference Series: Earth and Environmental Science, 2017
- Elastoplastic stress-strain state of flexible layered shells made of isotropic and transversely isotropic materials with different moduli and subjected to axisymmetric loadingInternational Applied Mechanics, 2007
- Thermoelastoplastic State of Flexible Laminated Shells under Axisymmetric Loading Along Various Plane PathsInternational Applied Mechanics, 2003
- Thermodynamic modeling of creep damage in materials with different properties in tension and compressionInternational Journal of Solids and Structures, 2000
- Determination of the strength of butt welded jointsWelding International, 1997
- The formulation of constitutive equations for fibre-reinforced composites with different behaviour in tension and compressionMechanics Research Communications, 1996