Plasma-induced bond evolution enables low-temperature fabrication of dense SiN x barriers for high-reliability phase-change memory
- 1 September 2026
- journal article
- Published by IOP Publishing in Journal of Semiconductors
- Vol. 47 (9) , 092306
Abstract
The thermal sensitivity of phase-change memory (PCM) poses a stringent thermal budget for back-end encapsulation, demanding high-performance diffusion barriers processable at low temperatures. Conventional low-temperature silicon nitride (SiN x ) films, however, are typically porous and prone to oxidation due to abundant metastable Si–H/N–H bonds. Herein, we propose an in-situ plasma cycling strategy that reconstructs the bonding network of plasma-enhanced chemical vapor deposition (PECVD) SiN x at a record-low temperature of 200 °C. Through controlled Ar/N 2 plasma exposure, we cleave metastable bonds and reorganize into a continuous Si–N network, achieving a near-theoretical density of 3.4 g/cm 3 (a 61.9% increase) and a 143.8% enhancement in Si–N bonding proportion. The resulting 40-nm barrier effectively suppresses Te/O interdiffusion, reduces wet-etch rate by ~67%, and maintains thermal confinement within 1.6% deviation. Integrated into PCM devices, this barrier yields a 98.7% SET/RESET operation yield and a 1.4-fold wider resistance window. This work not only provides a reliable encapsulation solution for PCM but also establishes a generalizable plasma-mediated interfacial engineering approach for advanced electronic devices under thermal constraints.Keywords
Funding Information
- General Project of Sichuan Natural Science Foundation (Grant number: 2025ZNSFSC0532)
- The Graduate Innovation Fund Young Seed Program Project of Southwest University of Science and Technology (Grant number: 24YCX1055)
This publication has 25 references indexed in Scilit:
- Chromogenic azomacrocycles with imidazole residue – Part II: Effect of spacer type and N–H orientation on chromogenic and spectroscopic propertiesDyes and Pigments, 2026
- Interfacial reliability of Al/Sb2Te3 and W/Sb2Te3 for phase change memory applicationMaterials Science in Semiconductor Processing, 2025
- Electrical and optical properties and XPS spectra of pyrochlore Bi1.65Mn0.5Cr0.5Nb2O9-ΔCeramics International, 2025
- Picosecond Operation of Optoelectronic Hybrid Phase Change Memory Based on Si‐Doped Sb FilmsAdvanced Functional Materials, 2024
- Thermal stability and high speed for optoelectronic hybrid phase-change memory based on Cr doped Ge2Sb2Te5 thin filmCeramics International, 2023
- Low-temperature fabrication of silicon nitride thin films from a SiH4+N2 gas mixture by controlling SiNx nanoparticle growth in multi-hollow remote plasma chemical vapor depositionMaterials Science in Semiconductor Processing, 2023
- Performance Improvement in AlGaN/GaN High‐Electron‐Mobility Transistors by Low‐Temperature Inductively Coupled Plasma–Chemical Vapor Deposited SiNx as Gate Dielectric and Surface PassivationPhysica Status Solidi (a), 2022
- The role of cathodic current in PEO of aluminum: Influence of cationic electrolyte composition on the transient current-voltage curves and the discharges optical emission spectraApplied Surface Science, 2017
- Effect of individual discharge cascades on the microstructure of plasma electrolytic oxidation coatingsApplied Surface Science, 2016
- Atomic-scale structural evolution of Ta–Ni–Si amorphous metal thin filmsMaterials Letters, 2016