Morphology Formation in PC/ABS Blends during Thermal Processing and the Effect of the Viscosity Ratio of Blend Partners
Open Access
Abstract
Morphology formation during compounding, as well as injection molding of blends containing 60 wt % polycarbonate (PC) and 40 wt % polybutadiene rubber-modified styrene-acrylonitrile copolymers (ABS), has been investigated by transmission electron microscopy (TEM). Profiles of the blend morphology have been recorded in injection-molded specimens and significant morphology gradients observed between their skin and core. A <10 µm thick surface layer with strongly dispersed and elongated nano-scale (streak-like) styrene acrylonitrile (SAN) phases and well-dispersed, isolated SAN-grafted polybutadiene rubber particles is followed by a 50–150 µm thick skin layer in which polymer morphology is characterized by lamellar SAN/ABS phases. Thickness of these lamellae increases with the distance from the specimen’s surface. In the core of the specimens the SAN-grafted polybutadiene rubber particles are exclusively present within the SAN phases, which exhibit a much coarser and less oriented, dispersed morphology compared to the skin. The effects of the viscosity of the SAN in the PC/ABS blends on phase morphologies and correlations with fracture mechanics in tensile and impact tests were investigated, including scanning electron microscopy (SEM) assessment of the fracture surfaces. A model explaining the mechanisms of morphology formation during injection molding of PC/ABS blends is discussed.Keywords
This publication has 41 references indexed in Scilit:
- Polymer Foams Made of Immiscible Polymer Blends Compatibilized by Janus Particles—Effect of Compatibilization on Foam MorphologyAdvanced Engineering Materials, 2015
- Foaming of an Immiscible Blend System Using Organic Liquids as Blowing AgentsJournal of Cellular Plastics, 2010
- Morphology and mechanical properties of polyamide 12/polypropylene blends in presence and absence of reactive compatibiliserPolymer, 2006
- Melt processed blends of poly(styrene-co-acrylonitrile) and poly(phenylene ether) compatibilized with polystyrene-b-polybutadiene-b-poly(methyl methacrylate) triblock terpolymersPolymer, 2004
- Morphology development and control in immiscible polymer blendsMacromolecular Symposia, 2000
- Blend morphology development during melt flow: Correlation of a model concept based on dynamic phase volume with practical observationsJournal of Applied Polymer Science, 1999
- Development of polymer blend morphology during compounding in a twin‐screw extruder. Part I: Droplet dispersion and coalescence—a reviewPolymer Engineering & Science, 1992
- Phase morphology characterization and ultimate mechanical properties of 60/40 PC/SAN blend: Influence of the acrylonitrile content of SANPolymer Engineering & Science, 1991
- Mechanical properties of ABS/polycarbonate blendsJournal of Applied Polymer Science, 1984
- The viscosity of a fluid containing small drops of another fluidProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1932