Temperature Stable Piezoelectric Imprint of Epitaxial Grown PZT for Zero-Bias Driving MEMS Actuator Operation
Open Access
- 10 October 2022
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 13 (10) , 1705
Abstract
In piezoelectric transducer applications, it is common to use a unipolar operation signal to avoid switching of the polarisation and the resulting nonlinearities of micro-electromechanical systems. However, semi-bipolar or bipolar operation signals have the advantages of less leakage current, lower power consumption and no additional need of a DC−DC converter for low AC driving voltages. This study investigates the potential of using piezoelectric layers with an imprint for stable bipolar operation on the basis of epitaxially grown lead zirconate titanate cantilevers with electrodes made of a metal and metal oxide stack. Due to the manufacturing process, the samples exhibit high crystallinity, rectangular shaped hysteresis and a high piezoelectric response. Furthermore, the piezoelectric layers have an imprint, indicating a strong built-in field, which shifts the polarisation versus electric field hysteresis. To obtain the stability of the imprint, laser doppler vibrometry and switching current measurements were performed at different temperatures, yielding a stable imprinted electric field of −1.83 MV/m up to at least 100 °C. The deflection of the cantilevers was measured with a constant AC driving voltage while varying the DC bias voltage to examine the influence of the imprint under operation, revealing that the same high deflection and low nonlinearities, quantified by the total harmonic distortion, can be maintained down to low bias voltages compared to unipolar operation. These findings demonstrate that a piezoelectric layer with a strong imprint makes it possible to operate with low DC or even zero DC bias, while still providing strong piezoelectric response and linear behaviour.Keywords
This publication has 32 references indexed in Scilit:
- Flexoelectric rotation of polarization in ferroelectric thin filmsNature Materials, 2011
- Resistance switching and white-light photovoltaic effects in BiFeO3/Nb–SrTiO3 heterojunctionsApplied Physics Letters, 2011
- Effect of external fields on the switching current in PZT ferroelectric ceramicsSolid State Communications, 2010
- A resonant frequency tunable, extensional mode piezoelectric vibration harvesting mechanismSmart Materials and Structures, 2008
- Ferroelectric polarization-leakage current relation in high quality epitaxialfilmsPhysical Review B, 2007
- Electrical properties of PZT thin films grown by sol–gel and PLD using a seed layerMaterials Science and Engineering: B, 2004
- Temperature dependence of the properties of vapor-deposited polyimideJournal of Applied Physics, 2003
- Polarization and self-polarization in thin PbZr1-xTixO3(PZT) filmsJournal of Physics: Condensed Matter, 2001
- Built-in voltages and asymmetric polarization switching in Pb(Zr,Ti)O3 thin film capacitorsApplied Physics Letters, 1998
- Self-polarization effect in Pb(Zr,Ti)O3 thin filmsIntegrated Ferroelectrics, 1998