Solid-Phase Microextraction for the Quantification of Acetophenone Migrated to Air and Water from Toys and School Supplies
- 30 October 2023
- journal article
- research article
- Published by Pleiades Publishing Ltd in Journal of Analytical Chemistry
- Vol. 78 (10) , 1414-1425
Abstract
Acetophenone is a reagent used in various consumer products, including fragrance chemicals in toys and childcare products. Contact with acetophenone-containing materials can harm human health, and therefore acetophenone migration levels should be controlled. A new procedure for the quantification of acetophenone migrated to air and water from toys and school supplies using solid-phase microextraction and gas chromatography with mass spectrometric detection is proposed. The optimal combination of acetophenone response and its relative standard deviations was achieved for air samples after 10-min extraction at 25°C and for water samples after the addition of 3.5 g of salt, agitation/preincubation at 500 rpm for 5 min at 60°C, and 20-min extraction by polydimethylsiloxane/divinylbenzene fiber. The developed procedure provided linear calibration with R2 > 0.996 at 1–50 µg/m3 in air and 1–20 µg/L in water, and low limits of detection and quantification of acetophenone in the air (0.01, 0.04 µg/m3) and water (0.01, 0.03 µg/L). Spike recoveries of acetophenone were 109–116% for air and 90–111% for water. Acetophenone concentrations migrated from toys and school supplies into the air ranged from 0.6 to 1.5 µg/m3, except for eraser type II (9.7 µg/m3) which exceeded the maximum permissible concentration by 3.2 times. Acetophenone concentrations migrated to water were 1.3–3.5 µg/L.Keywords
This publication has 36 references indexed in Scilit:
- Passive Sampling and Analysis of Naphthalene in Internal Combustion Engine Exhaust with Retracted SPME Device and GC-MSAtmosphere, 2017
- Characterization of off-odours and potentially harmful substances in a fancy dress accessory handbag for childrenScientific Reports, 2017
- Simple and accurate quantification of BTEX in ambient air by SPME and GC–MSTalanta, 2016
- A tecnologia de remoção de fósforo: gerenciamento do elemento em resíduos industriaisAmbiente e Agua - An Interdisciplinary Journal of Applied Science, 2014
- Emissions from polymeric materials: Characterised by thermal desorption-gas chromatographyPolymer Degradation and Stability, 2014
- Acetophenone2014
- Comprehensive analysis of the toxic and refractory pollutants in acrylonitrile–butadiene–styrene resin manufacturing wastewater by gas chromatography spectrometry with a mass or flame ionization detectorJournal of Chromatography A, 2012
- Solid-phase microextraction Ni–Ti fibers coated with functionalised silica particles immobilized in a sol–gel matrixJournal of Chromatography A, 2009
- Headspace-SPME-GC-MS Identification of Volatile Organic Compounds Released from Expanded PolystyreneJournal of Polymers and the Environment, 2004
- Qualitative and quantitative solid-phase microextraction gas chromatographic–mass spectrometric determination of the low-molecular-mass compounds released from poly(vinyl chloride)/polycaprolactone–polycarbonate during ageingJournal of Chromatography A, 2003